Reduced to £4999

300TDI 1998 143k Miles 2 former keepers Previously used as a farm Landy MOT Dec 20th 2015 5 Speed R380 Gearbox 3 seats in front Some black chequer plating Side rockbars Power steering Steering Guard Recent steering box change - the drip tray under the car is probably not neeeded...

A Defender

I have the following available for a front drivers side door: 1 - Black door card (for electric windows) 2 - Electric window & central locking motor/mechanism/wiring 3 - Window glass, green tint £5 each, collection only from West Sussex (BN15) Sean

Very nice,who supplied them?

Hi all, How easy is it to convert a complete electric windowed door to a manual door, assuming you had one of each ? I have a '97 300TDI that has a nackered manual windowed door, and I just had delivered a straight TD5 electric window door. Cheers Sean

I have obe going cheap in sussex

Use lubrication such as some brake fluid or caliper grease,oh and make sure the piston is square as there is a fine tolerance

I fancy some side windows also. Which ones are those?

Does anyone have a recommendation for someone who can set timing,tapets,fueling and so forth in sussex or surrey? Cheers Sean

Unfortunately my first planned 4x4 day coincides with their website being down. Does anyone know if its open today and what the addy is? Cheers Sean

Bingo! Hey you are good at this game... As per my thread ive done plenty of jobs on the landy so far lad!

I have less time free with my new job. Need cylinder head changed, timing belts done and rusty front pipe changed.

Anyone know of a small time operator near worthing/shoreham? Need a few bits dont on my defender

Well things are progressing well. The suspension is holding up well and it's starting on the button with no diesel leaks. Time to paint the last bits of the chassis and axles Here is how it stands today. I have a few more jobs lined up, such as paint rear door, fit some rock...

I have made do for now, but i'm very concerned with the clearance here. Sean

After a trip to the nut and bolt store to get some nuts that actually fit, progress was made in fitting the new front suspension. Not finished yet as there is obviously an order needed in fitting the sprint plate retaining bolt after tightening the bottom shock bolt. I will do that once I get...

cheers Boris, very helpful

Hi all, Just about to but an entire set of front shocks, springs, turrets and rings in. Here are the items provided by procomp. Am I missing a set of washers to cup each rubber washer ? Top: Bottom It was the same story with the rears also. Cheers Sean

Good progress today. Managed to get the entire front suspension off, cleaned and painted the front chassis items. The off-side turret came off easier, especially as I made more effort to attack the turret bolts...all other options are a nigtmare...as learnt from removing the near-side...