Bump

I have had a look and it has a solid crank pulley. Any other idea's?

I have a 2001 1.8K Petrol Freelander which the engine make a unusual noise and the entire car shakes but only when the engine is hot. I can only describe the noise as sort of a lumpy tick over. I have found the if I remove the PAS and or Alternator belts the noise / vibration stops. Does...

Anyone know anything about the Security side ????

Finally got round to adding my second key but there is no key learning under security > maintenance. Anyone else know where you / how to make the ECU learn a key??

Thanks I'll give it a try and report back

Doesn't anyone know how to pair a key to the ECU??

Anyone know how to add a new key (transponder) to the Immobiliser ECU (for a 2001 Freelander)? I can view the working key using T4 unit but you can only add a key that the ECU has 'learned' and I have no idea how to do this. Anyone have a clue how the ECU learns a new key transponder code? Thanks

There should be a fuel cut off, under the fuse boxes in the engine compartment. Might be worth a press.

It's a long (and boring) story but....I had a new lock set fitted (and I mean new) by my local garage (a Rover specialist) but he could not find his T4 freelander disk to pair the new ECU to my car. So I took it t 2 different LR "Specialists" both were unable to communicate with the immobilizer...

Thanks, We were slowly coming to that conclusion. It has a 1.8 K series engine (on a Y plate, last 6 digits of the vin are 307866). Which CD would I need and does anyone know where I can get one? Thanks

I have just re-checked my pinout and I have the following (I misread pin 1) 3 - B (Black) 4 - B (Black) 7 - K (Pink) 13 - K (Pink) 16 - P (Purple) pins 3 & 4 are spliced together. which is very close to the pinout in the Electrical Library in the Rave CD.

We never got as far as switching to the grey plug and the CD is DRG0022. I have attached a screen shot of the error in testbook. How do I tell what year my freelander was made? I have found the ODBII pinout in the electrical library on the rave CD and it doesn't match mine at all (also attached)

Thanks guys, I have seen the odbII pinout diagrams but what I need it what a 2001 freelander wired socket should be. I was using testbook ver 5.06 (doesn't have the 2001 model listed though). I did stupidly payed a LR "specialist" £60 to tell me (looks like t4 testbook ver 6.0) there is a...

I may be wrong but I have been told (by LR "specialists") once a immobilizer ECU has been paired it cannot be repaired (part of the security). I have just had a replacement lock set fitted and they were unable to fit a new ECU due to the fact that, A. my current ECU is failing to talk to the...

My 2001 Freelander will not connect to a LR T4 diagnostic unit. I've had a look at both the Rave CD and a Haynes manual but I can't find a complete diagram of the diag socket. The Rave CD suggests four wires but I have 5 (picture attached); If I have this right, Pin 5 pink pin 8 purple pins 12...