Cheers I will do that , TPMS issue won’t away a bit like the Coronavirus

I am more certain than ever that the Land Rover approved diagnostic tool is needed to activate these sensors , thanks for the info It’s been a great help .

If the fault hadn’t started as soon as I swapped the wheels I would agree , I’m stumped . Also on the Diagnostic it has ( number of missing wheel units 4 ) , so it can’t see the sensors . It’s a trip to the local Stealers by the looks of it

sorry I should clarify the read fine on the handheld TPMS Autel 408 , they don’t register at all on the car . And 433 is the right frequency as the sensors that come out since new were 433 as per the photo of an exact one taken from the car myself .

And it was £22 GBP each I paid as just checked

brand spanking new , the guy is still selling them on eBay now as I just checked . They read fine on the TPMS reader

cheers Brian

When I purchased these off eBay I was told they are in sleep mode and just require activation with a tpms trigger , seems I have been mislead to the tune of another £60 , would have been cheaper to have had the car swapped not the alloys at this rate lol .

This is what’s on the car now And this is the type that came off the car

I Here is the code C1D21 but in the DTC lookup there is nothing for it on the icarsoft LR V2 ? Anybody else know the issue ?

I am surmising it will be a dealer level diagnostic tool , perhaps someone else will clarify this ? but thanks for the document its been a great help Sierrafery

I gather this SDD/Pathfinder is dealership software ?

Sierrafery I had I look at the document you sent and I think this is possibly the key part ? ( Use the Tire Pressure Sensor Replacement routine available in SDD/Pathfinder to write the new wheel unit ID (s) to the tire pressure monitoring system control module. Then, test drive the vehicle for...

Cheers Sierrafery , I will print this off and read it in depth tonight , just scanning through it , it seems to put me on the right path To getting to the bottom of the problem . I think it’s going to require diagnostic equipment that’s more capable than the Icarsoft LR V2 I just purchased ...

that is the more likely solution, though the model number of the ones I have fitted are classed as compatible on most TPMS sales websites

Hello , I drove it as per the recommendation to learn the new sensors , at over 20kmh for 20 mins , after 10 mins the tpms begins to flash . Diagnostic reader lists wheel module fault , I clear it but after a restart it’s back a short while after . Will post exact images later when I’m home

Discovery 4 HSE 2014 Diesel sdv6 Hi all , Newbie to forum here . I’m not usually the forum type of guy but I’m stuck with this problem and I need help. I have swapped my wheels for those off A range Rover sport and fitted new TPMS sensors as the old ones were due to be replaced. Now I have a...

Cheers I will do that , nice one

Hi all , Newbie to forum here . I’m not usually the forum type of guy but I’m stuck with this problem and I need help. I have swapped my wheels for those off A range Rover sport and fitted new TPMS sensors as the old ones were due to be replaced. Now I have a TPMS fault light constantly lit, I...