Sparky78

Member
Discovery 4 HSE 2014
Diesel sdv6

Hi all ,
Newbie to forum here .
I’m not usually the forum type of guy but I’m stuck with this problem and I need help.
I have swapped my wheels for those off A range Rover sport and fitted new TPMS sensors as the old ones were due to be replaced.
Now I have a TPMS fault light constantly lit, I have gone through the new TPMS learn process but the system will not recognise the new sensors.
I have cleared the fault with my Land Rover diagnostic tool and checked The TPMS sensors With a reader and they are working but not talking to the car.
What else can I do without having to take the car to the dealership and get ripped off.
Hope somebody out there can help regards mark.
 
Land Rover changed to a different Tpms system in the later D4’s so maybe the sensors aren’t the correct type for the car to recognise
 
Land Rover changed to a different Tpms system in the later D4’s so maybe the sensors aren’t the correct type for the car to recognise

that is the more likely solution, though the model number of the ones I have fitted are classed as compatible on most TPMS sales websites
 
Welcome to the forum
I7pha4t.jpg


This section is for introductions only. For technical help you should post your questions in the vehicle specific sections listed below, where owners of those vehicles will offer advice.

Main forum index:
www.landyzone.co.uk/forum

Discovery:
https://www.landyzone.co.uk/forum/land-rover-discovery.8
 

Similar threads