Hi, the tank doesn't come apart but yes you can clean the it. I used jizer degreaser then rinsed it with cold water, then put it in a bucket of hot soapy water & 'shook it all about' 🙂. Final rinse with cold water again & dried it completely.

Hi, once the circlips are removed do they just tap out? The uj, diff end is fine as is the one on the front prop. it's one axis on the rear prop, VCU end, that moves a bit then stops. All the uj's are smooth, even the bit of movement I get on the 'problem' one, so that sounds like a plan, many...

Hi, I might just do that as I've just had a quote from a prop recon place for £200 😮. One joint has all the movement it should (I thought I'd do both as a precaution). Prop place says it's not necessary to re-balance just for uj change. I'll try the lube route. 🙂

Hi all, I've gone to refit the propshaft (after g/box repair) & as it was off the road for so long the uj's on the rear prop are stiff & one locks after a small amount of movement so has anyone replaced the uj's without any vibration problems afterwards or shall I try & find a s/h one ? Any...

Yep, I use the Bosch blades fr & rr on my D2. My FL1 had the flat blades, also use them on my Mazda 2 & SHMBO's Mitsubishi Lancer never had any issues with dragging/skipping etc. The only thing I had on my D2 was the pattern arm (rear) on it which caused only half the screen to be wiped, now got...

(Which brand/style?) I got a Flatdog one, very well made & I love the slots/tracks in the slats which you can put anchor rings anywhere (see pic) & they fitted it all for free along with the awning I supplied & only took 30 minutes, very pleased.

Large o-ring loose in filter bag & smaller o-ring on filter itself, hope this helps. Forgot thickness of o-ring on filter :rolleyes:

Hi, is it the one that receives the fir tree fixing ? , see pic, there's a bracket like that(one either side) maybe why it has R on it & the other has L.

Hi, with the tailgate open the window switch will not operate the window so that's ok (how it should be). With the tail gate open if you operate the tailgate release you should still hear the mechanism working so given you've had a replacement mechanism already & as long as you know it was in...

Will need translation I'm afraid @Stanleysteamer or @Ian M in France cheers or merci

Hi, I suppose the bleedin' obvious is to check the instrument pack/bulbs & printed circuit board. I haven't got access to my electrical library at the moment but @sierrafery will no doubt be ya man.

When people fixed things, allegedly 🤣🤣.

Like most of us you'll be a LR mechanic before you know it 🤣🤣,all the best.

Bonjour, (that's my limit🤣🤣). If the window is down & everything else is OK the tailgate should still open. Have you tried disconnecting the battery for a minute then reconnecting it ? Once reconnected use the tailgate switch in the centre consol to (raise) recalibrate the window, you hear beeps...

I did mine earlier this month (post on here somewhere) mine has the highline lear/Philips system but I fitted the HK ones & they work a treat the only difference being the wiring connectors, FYI they are the same as the FL1 HK tweeters (in the door mirror mouldings)if you can find any of...

Great work,again, you'll lose a few pounds working in that heat ! That journal with the plastigauge on it looks to have insufficient oil clearance 🤣🤣🤣, I remember in my motorbike days it being a PITA,all the best.

I've just had a quick look under the seats of mine (it has cd changer & amp under there) but can't see anything like that. I don't recall seeing anything like that either when I last had the centre consol out,sorry.

Had Flatdog fit me a roof rack today + they fitted my awning, great service.

Hi, if you scroll to the bottom of this page you'll see I picked up a couple of new filters which inc the o-rings. Unfortunately I'm in Skipton until Tuesday (LR classic off road driving experience then having Flatdog fit me a roof rack on the way home 🙂) but I can measure the o-ring in the...

Brilliant, out of interest what serial no does your transfer start with ? Mine is 41D (see pic). I've never managed to see (properly) if it has the threaded stud poking out the top of the plate with the 3 bolts in it. I do have the 2 wires hanging about under there ! Cheers.