So I see but I'm struggling to match the colour codes to anything.

After reading another thread on here regarding springs I went to check what's fitted to my 56 6A 5dr td4 auto. Does anyone know if these are correct as I'm struggling to find any info to confirm this Orange and white are on the front and pink and white on the rear, measuring from hub centre...

I have in the past and it did look kind of lower, I have looked at the springs and they have orange and white markings on the front and pink and white markings on the rear. I have just posted pictures on the freelander Facebook page

Is this true? where can I find out more information on this?

I replaced the diff taper bearing which did have some signs of wear (no end float though) before I change the seal again I might clean the leak up and give it quarter of a turn, again I could not detect any play once refitted. I'd used the "marking method" maybe it was not quite tight enough...

VCU is fine, five matching tyres with the newest on the rear. I did have saggy VCU bushes though which have both been replaced (also replaced rear diff input bearing) IRD output seal leaking also, my thoughts are a sagging prop has put strain on the seals.

Not yet. When I fitted the last seal there appeared to be evidence of oil discharged from the breather pipe and as this car as doesn't know what off roaring is I did not bother. I'm planning to replace it again but this time Intend to remove the diff cover as well for investigation purposes...

I fitted a seal a couple of months ago, its decided to leak again.

Picked a genuine one up off ebay for £38 :)

Don't suppose you know if the Mondeo fog light surrounds fit the freelander do you?

Autosol is also good at polishing them up.

I simply typed in Land Rover and freelander and it brought up a list which included all variants

Kyb list shocks for the FL1 http://www.kyb-europe.com/catalogue.asp

My 56 plate has a plug behind the right hand rear panel for the tow bar electrics, it was actually located on the inside of the inner skin, genuine tow bar electrics just plugged straight in.

Is yours a facelift? I'm thinking of fitting one of those usb sockets in the blank spaces in the centre console probably next to the rear window switch.

Been out in between the rain showers and fitted a cheeky little voltmeter :)

I'd like to see a picture if you put spacers on please.

Stuck in for an mot, only needed a number plate bulb, happy days!

Washed mine last night and adjusted the handbrake before the mot, I woke up to locked up rear wheels.

Fingers crossed it will be worth the wait.