Could try richards chassis got my rear spring mount from them. Richards Chassis Unit F2/3 Swinton Bridge Industrial Estate Whitelee Road Swinton Mexborough S64 8BH neil

Ouch thats some serious wedge.dph who made my extra long intercooler hoses wont do the top hose says to much issue with bleed screw.will stick with genuine keep the britpart one for emergencies.

have you removed the egr completely or just fitted blank.if latter get it removed.

Been having issues with my serck intercooler to inlet pipe. they all seem to be too short and drawing air in.derby performance hoses made me one that was a piece longer. now fits over intercooler pipeoutlet right up against intercooler and well over egr delete pipe.also using extra wide pipe...

Location would help so others can help you.

Got one on mine.straight forward,fitted mine with a aluminium sport radiator less than an hour to do the lot.

I thought i had bought genuine turned out to be ****part.saving pennies for silicon.

Have you got an aluminium sport radiator.i bought one for mine and had a coolant leak. no visible signs. the manufacturer replaced as its a hairline crack on the top near the small bore return outlet.new one fitted fingers crossed.

Change fluid. my previous did this, thought at first steering pump.fluid was brown rather than red. all ok after a change.

Check the drain hole on A post.if i remember its bottom inside at end of sill.

Glad to hear you have it sorted.i too have been skanked by one of the big dealers in leicester.i wont tell you it was sturgess group.

Bugger never noticed that.its mainly the top hose and fuel cooler pipes i need. my fuel cooler pipes are a bit soft.

Thinking of getting these. DIRENZA LAND ROVER DISCOVERY 2 TD5 99+ SILICONE RADIATOR & OIL COOLER HOSE KIT | eBay Any good!

Ooh glad i read this. was about to fit a britpart top hose.

yes when they are on way out.i know its a different vehicle but when my mondeo dmf was dying it would be quiet then chatter or rumble like a good un.sometimes just a noise like a knackered release bearing.

Have they checked noise isnt coming from dmf.

Its way better than waxoyl that comes off after a while.the omnicote converts and seals the rust.its not at all messy.get it on yer hands and it washes off.anything else once its dry no chance.as i said dishwasher me mug daily and its still on.i also blew out chassis and filled chassis with...

Get some omnicote on the chassis its the mutts.did mine about 6 months back.got some on my mug and the dishwasher doesnt remove it. Shiney Chassis Slideshow by cambridgecockney | Photobucket

Mines 02 £285.ins fully comp me and er indoors £152.ins depends on your post code and luck of the draw.

Take the belt off and run it.