Another update, excuse the dirt not had chance to wash him yet. Bought some rear light guards and stainless hardware... Before... After...

Fitted a new battery last week but no pics. Also just after fitting my battery he started misfiring on LPG, found the problem after swapping some lpg injectors round. Turned out it was a free fix! All the injectors just needed a strip down and clean. Running perfectly again now I've bought...

So I went to fit and adjust the center box delete pipe but found out it was miles out and wouldn't work so I made my own. Sounds insane, only drove back from work yet so need more time with it to give my true impressions.

Thanks mate. Good luck with your build!

Cheers buddy, I'm sure I'll get a recording or 2! Yes it's really satisfying knowing it's all been done correctly. No oil leaks at all, bone dry :) For your water leak check the throttle body plate. Very common.

So got the new rear caliper fitted and bled up. New parts arrived to fix the leak. Part way through stip down. Stripped and awaiting a clean. All fitted and ready to re install with a new throttle body gasket. Picked up a new center section ready for modifying to fit my current...

So I cut the tip off the back section I made and made it into a slip on tip for the current backbox. This allows me to try the sound and easily remove it if I don't like it. Happily I do so it will stay. I've also got a center box delete pipe on the way to have a play with. My current system...

Got a few little bits sorted today. First off was the exhaust tip. The original was rusted and looking sorry for itself. So I removed the tip and cleaned it up with a buffing wheel then applied ceramic coating to hopefully keep its appearance. Next up was a bulb change on the climate...

Next up was to say farewell to the 3 amigos!! New hub and sensor is needed. OEM spec hub with genuine sensor, new bolts and nut also. Job done, no issues at all. Just need to refit the brakes which were stripped and re greased etc. Also greased my prop etc while I was at it.

So todays first job was to redo the LPG filter/pipework under the bonnet. I've fabricated a new stainless bracket to mount the new vapour filter. This was fitted with stainless hardware. I made up new hoses and covered then with black braiding to protect them and sealed each end with heat...

So had an annoying buzzing noise to the right side of my instrument cluster. Upon looking into it I found out it could be this little temperature sensor... Absolutely fifthly! Stripped it down for a good clean and lube. Much better! And the best part the annoying buzzing has gone...

It's a mongoose system and not fairly advertised. It's not rusted badly but looks similar to my landy exhaust. My 316 exhaust stays mint. This is off topic anyway. I don't care what grade it is, I want the brand.

I have torque pro here but have access to snap on at a friend's garage. Get advice, thank you.

My ST stainless exhaust is 304 and that has corroded so you wrong.

Will do, thanks.

304 corrodes too.

It is 304 grade stainless, the tailpipe trim isn't.

It's strange that both codes came at the same time. I was hoping the sensor caused both codes.

Is this one any good? https://www.island-4x4.co.uk/wheel-bearing-sensor-front-disco-britpartwabco-tay100060-p-40739.html