Hello, after some strange noises and getting hot I opened the motor for the compressor and the bush in the end plate is worn and no longer round. Where can I buy this part? I have been searching for quite some time now. I would prefer the complete end plate with the bush mount in or just the...

mine done the same a few weeks ago, i disconnected the RF receiver and took it inside over night while i looked on the net for a new one when i reconnected it in the morning and tried it again i was able to re sync my keys and all has been fine since. I think something interfered with it so I...

I will take a look at the tailgate button as something was a bit strange a while ago I opened the top half but the bottom would not work although yesterday and today it's been no problem. All the interior lights seamed to be working last night but I will take a closer look. No where seams to...

they were listed at £250+vat yesterday but POA when i looked today I found one suppied by britpart cheaper, surly it is the original part and not a cheap copy right?

is there a trusty supplier for these?

ok i think i will change it, just called the local dealer but they cannot order it as the factory doesn't have stock :mad: and it would be €270 if they could

I check what one i have and its the interim one. Do you think its worth to replace it anyway? I know the older one can wake the becm but will the new one be less prone to this problem? thanks

this morning i put the rf receiver back in as i removed it last night and tried to put the eka code in but it wouldn't work, put the key in the ignition and it wouldn't start, pressed the unlock button and it worked. I tried the same thing many time yesterday but it didn't work, is it possible...

I didn't touch the remotes I left one in the ignition all day since moving it in the morning and they both worked perfectly since I replaced the battery in them about 6 months ago. Maybe it's a problem with the becm then?

I just went and tried disconnecting the antenna and using the fob right close to it but still nothing

I Will take it to work tomorrow and see if it works but I always park it here to wash it and never had a problem before

After much cleaning my P38 today I went to park it back on the drive and it wouldn't start.It is a 2001 model year Both remotes that were working perfectly now don't work. I can start the car with the EKA code but still nothing from the remotes, I tried all the different re-sink methods I...

not sure but this shows what you need Roof Assembly, Mounting Hardware for Defender - Rovers North - Classic Land Rover Parts no.17 and attached nuts/washers

you can use the 2 special studs from your truck cab and you will need two more of them for the back corners or you can improvise with washers, the rest are normal nuts and bolts

all the manuals are here pdf Land Rover Manuals | Landroverweb.com you will find yours under 90/110 even though it says tdi it still has the V8

I fitted some floflex in my 90 over a year ago and they still look like new, I have no complaints

i used to have the same issue, I never bothered to look at is as i was putting a tdi in.

you have made a very nice job of that chassis well done

This is the same reason I am thinking of doing mine. Mine is cheaper €1848 :o

I will most likely but already had a decent offer locally. Did you notice my location?