Another pass on the MOT, no advisory, that's 5 on the trot now , maybe 6, can't remember now. Who says these beautiful P38s are a mare to live with.

I'm with Saint, rear valley gasket.Easy enough job, few nuts and bolts. Few hours work at an easy pace, need a torque wrench for the inlet manifold.

There is also a sensor on one of the metal pipes that go into the heater matrix, you can see it if look up under the dash on the drivers side, mine went bad and caused the book symbol to show up. All good once replaced.

I also had that metal clip fall out of my dash, it landed down on the drivers side footwell ain't got a clue where it came from but all is well with the old girl .

I think you can get a complete hose kit for a gems but not a thor, I replaced all my hoses with OEM land rover, a much better fit than aftermarket.

I once had a dog called drift.

Hi, it could be you have an electrical fault, if you remove the passenger side kick panel you will see 2 white blocks check them for corrosion or broken pins, most people including myself cut the blocks out solder and heatshrink the wires back together, also could be a dodgy driver pack too...

put a picture up of my muts too, have only just learnt how to post pictures on here. Might try and find some saucy one's

here is my baby, 2000MY. Has cost me plenty over the fine years I have had her, but as never broken down or failed an MOT, always gets looks when I take her out, which isn't that often these days, just used mainly for days out and towing the tin tent down to Cornwall for our annual holidays. I...

Hi Joss, in your second picture that screw by the rubber grommet is where I had my leak, i removed screw and the plastic clip that the screw screws into a nd put a small blob of sealant in the hole, replaced the clip then put a small blob of sealant on the end of the screw and refitted the...

That panel is a very tight fit, when i took mine of i found it easier to also pull the th bonnet realeas at the same time.

I used tiger seal to bond some rubber wheel arch protecters for my P38, also my son broke off a wing mirror on my focus whilst riding his bike, used tiger seal to re attach the mirror and it was stronger than before.

Gold Rover is a LADY joss.

My Honda Fireblade would also ice up in cold temperatures, those carbs didn't like the cold.

Like Dave says just bypass it , only takes an hours work and then never any more leaks, its not needed in this country, doesn't get cold enough.

It does sound like your driver pack could be playing up but also check the white connector blocks behind passenger side kick panel, these are notorious for getting damp and the pins either going rusty or snapping off altogether as mine did, ì would also check all connections in the EAS box too...

I have a spare valve block in the shed, i changed mine for a brand new one of Kurt, it worked perfectly fine when i swapped them over, i can sort a valve if you get stuck. Paul.

Hi pete, Alan is correct they are the throttle body heater pipes, you can bypass the throttle body heater plate very easily. One of those pipes return to the expansion tank and one connects to a small nipple on the inlet manifold just behind the air con pump, what i did was remove the air con...

Run mine on the Halfords classic , does seem to run a lot smoother and quiter.

Hi all, anybody know where to get the latest sat nav disc from? Used to be loads on the bay but seems to be none on there.