Cheers The pipe wasn’t blocked and I poked some wire up it aswell but nothing, ran the air on for a while but nothing, the pipe didn’t even get moist, where does it go behind the dash? Towsey

Thanks for replies To be honest not looked at near side of tunnel but do get damp floor on drivers side but in wet weather so presumed this to be something else. To be honest this is the first vehicle ive noticed no water, even tractors leave a noticeable amount on hard standing. Am I right in...

hi all All the time I’ve had my d1 I’ve noticed there’s no water appearing from anywhere when I have the ac turned on. I have been underneath and checked what I think is the drain tube but still nothing, it works as it should apart from this tho Any ideas please Towsey

Anyone? Has anyone had Castor correction bushes tear when off road, given the lack of bush in places? Cheers Towsey

Hi all I really want to sort this ongoing problem on my d1 please bear with me and give me some clarification or put me rite if you can Basically I did a 2” spring lift and fitted all other bits needed aswell but I want to sort the castor but there doesn’t seem to be an “ultimate” way of doing...

Thanks for that I seem to remember spinning it before and it not doing this, it’s not loud and more of a feeling than a noise but it seemed odd to me. Thing is, I think nothing lasts as long as original so I try not to change things until I’m sure Cheers Towsey

Anybody able to give any symptoms of a power steering pump on its last legs please? In addition to my first post, it does the creeky groany noise mainly when cold but I’ve heard a few do it so don’t know how concerned I should be about it? Any experiences shared would be appreciated Towsey

Just seen this, love it!...you should be proud of yourself ...by the way, black. Silver looks posher but black looks more, well, Land Rover! Keep up the good work

Hi all I took the serp belt off other day to look for a noisey bearing somewhere which I think is the alternator fitted on Christmas Eve. Anyway I noticed there’s a bit of play in the pas pump which I’m wondering about but also when I turn it anti-clockwise which is the way it turns when...

Hi all I took the serp belt off other day to look for a noisey bearing somewhere which I think is the alternator fitted on Christmas Eve. Anyway I noticed there’s a bit of play in the pas pump which I’m wondering about but also when I turn it anti-clockwise which is the way it turns when...

Does anyone have any nato hitch dimensions please? Cheers Towsey

Just incase this is of any use to anyone, the centre hole of these 3 is about 10mm shallower than the other two, so the outer 2 are about 30mm and the middle 1 about 20mm, that's on my '55A-K' box anyway. And yes a bit of sealer on a short bolt sorted it Towsey

Thanks for digging that out for me, I already have the mounting plate hiding behind my bumper and I’m also going to make a tank guard. I like the idea of something poking out just past the spare for a number of reasons but don’t want something poking out by 6” or something like that, that was...

I only put some in from a different year disco, you might already have them? Don't quote me on this and I'm sure someone will correct me if needs be, 200's only had lights in pillars and no bumper lights at all then earlier 300's had full set of lights in pillars same as 200 but then extra...

I don’t know if this applies to you but I replaced my bumper bolts with stainless ones to make it easier to remove when going off road so it doesn’t get the corner caps pulled off of get bent upwards like I’ve seen before, and I’ve fitted light clusters in the pillars that have all the lights...

hi all I’m wondering what you guys have got set up for rear recovery please? I’ve got a YRM nato hitch mounting plate for my D1 but I’m after a bit of info if anyone can help please. I can’t decide whether to make a recovery point or fit a genuine or copy nato hitch, so can anyone tell my the...

Perfect! Thank you...again

Hi all Just done clutch and some bits and had the trans’ jack bracket in the 3 triangular patterned holes in the bottom of the box, anyway now it’s weeping oil from the centre hole. All 3 bolts were the same length but I was wondering if it’s possible the casing has been damaged or if this is a...

When I took it off there was sealer round the race so I let some back in there again but not behind it. Going on what I’ve said here do you think I should have any concerns about the tbox, I don’t know how sensitive to accuracy they are, or is that answered by the green oval ha. I was just...

Thanks for that My clutch is only a valeo with the different coloured springs and wasn’t sold as HD but we will see. I was sure at the time that I didn’t lose any shims although I was a bit surprised to find the lower cup for the layshaft bearing floating around with a snap ring round it rather...