Hi All Hope you are doing fine! I have found my fuel cooler leaking for a few days and seems that it is only the front end. Even it is very minor leak but the car slowly loosing coolant from the system so it is time to repair. I have already ordered Viton BS225 O rings. Has anyone of you have...

When you say feel it in park, does it mean that the handbrake applied? As I remember I also had the vibration in park but when pulled handbrake it changed. I think, even the car is not moving, the handbrake cable can transfer some vibration from the engine to the cabin. You can check it very...

I have changed the spring kit, shoes and cable as well and the problem solved. It was about 2 years ago and since the car is running sweet! As I have changed several parts I can not 100% confirm what has caused the problem but probably the shoes.

Check handbrake as well. In my case that was the root cause (i had vib around 2700-3000).

Just one comment on min tread depth. For a normal winter tyre the recommended min is 4mm. So, for an offroad 4-5mm also would be realistic. Attached a photo about the wear indicator of my tyre. So I am about 2mm away from it.

I know that 6mm is more than enough for MOT or use it on normal roads, but I am almost sure that it does not perform the same on offroad like a brand new BFG AT. I do not just want to waste money if it will not make a reasonable improvment. Otherwise i will put a set of MTs on my spare wheels...

So do you think there will not be big difference between my used (6mm tread) grabbers and a new BFG KO2? Do you have experience with MTs? How they behavie on road? I do not use my car on long distances, but i use it for going fishing to a river where the roads can be quite muddy and slippery...

Hi All Hope you are doing fine! I am thinking to buy a new set of tyres as my general grabber at2s are already getting close to wear limit (about 6mm tread depth) and also they are close to 8 year old now. My choice would be BF Goodrich at2 on my 18" wheels or MTs for 16" steel wheels. Will a...

Thanks for the answers guys. Job done yesterday. I had enough room to remove and put back the sump. Was easy without the gasket (when I made some trials) but when the gasket was on it was a pain. It is difficult to keep the gasket in position especially when you do it alone laying on your back...

Sorry, it is an engine sump, td5. In the meanwhile I have also found the answer, so the prop in my case can stay in place. It should only be removed if you still have the plastic undershield on.

Hi all I want ro remove the sump to change the gasket as it is slightly leaking. Do i need to remove prop to get better access? I have already removed front pipe and cross member. Thanks

I had stage1 from Stormtuning last year and satisfied with the result and also the service. Quick and helpful.

Thanks Feri. I will check charging. Just for info, before that happened my daughter turned on the inside light in the car (midle one) which was on for a few hours. So maybe my battery was a bit down...

Hi All, hope you are doing well! For quite a long time I did not have any issue on my car until yesterday when something really strange happened. After a few hundred meters I got SLS warning light with continues alarm sound (bongs). When my speed went under about 30km/h the signal has gone but...

+1 for genuine rubber or high quality silicone. I had silicones but finally changed back to original ones. In my case the silicons were slightly oily on the outside which probably coused by the poor quality of hose material which let the oil mist penetrate though the wall of the hoses. Even I...

In Hungary D2s are getting rare, only 3-4 are for sale. The prices are around 5-7k £ or even 10k for a petrol and for a tuned one:-) I would be happy to get such for 1.5k to get as spare!

I have a 2003 td5 manual with stage1 remap and got 22-24 as average mainly on short runs (never on highways). As before suggested, check sensors then fill it fully up drive few hundred kms then refill again (possibly on the same station) then calculate.

I also felt Monroes soft and changed to Bilsteins (only front and kept the Monroes at the rear where I have air springs). Satisfied with this set up.

let me just have a question regarding on squeaking. I also have a kind of squeak when turn the steering wheel especially when changing direction slowly (like reverse-forward-reverse). Did you have similar issue?

I have changed on mine when installed CDL. Quite tricky to reach all bolts but manageable. Used mirror or sometimes just undo bolts blind. would be much easier after removal of front left seat.