OK thanks will do :-)

OK thanks, trouble is on mine it's all missing so nothing to model the replacement on. I'll look for a used handle assembly I guess.

The drivers side door lock on my D2 TD5 is broken. The key just spins left and right with no resistance. I stripped the door card off and took a look, it seems I have something missing, as I can see the back of the lock barrel and nothing is attached, from the rave files, it looks like there...

I recently changed the same hose on my D2 Td5 as it had chafed on the power steering hose. It didn't have this piece on the old original one or the new one....

Just done my two keys this week with £4 ebay fob, worked fine. Only issue is that on both my original keys the plastic part that holds the key into the fob snapped. I just knocked out the little roll pin on the spare blades that came with the new fobs and swapped them over to the original blade...

OK my bad.... now corrected

OK thanks for the help. I called my local LR dealer they want £25 to supply the code :-(

Perfect, thanks very much :-) Seems like there are a few different versions out there..

Does anyone have a copy or link to the Rave file workshop manual for the Disco 2 TD5 ? I have downloaded two sets of Rave files, but the workshop manual seems more biased to the V8 Petrol model than the Td5 The title of the manual states NAS edition, whatever that means ? Thanks

After trawling around a bit, I discovered that this pipe is the tank breather.... I'm beginning to think we've overfilled it with fuel slightly..

Does anyone know if the Hawkeye reader can retrieve the EKA code from my 53 reg Disco 2 TD5 ? If so, what menu does the function live in ? Thanks Mat

Last night I noticed a little patch of diesel on the drive under the drivers side rear mudflap... A couple of weeks ago I had the complete set of fuel pipes replaced over the tank due to the common problem of chafing on the body, so I thought this could be related. On closer inspection there...

I've had some problems with my D2 facelift.... 3 Amigos on at least two separate occasions. I read some good advice on this forum & bought a Hawkeye reader, it was basically brand new in box only used once, cost me £190 but to be honest it's worth every penny :-) It correctly diagnosed my...

Hi, yes they do fit. I have Disco 3 18" wheels on my 53 plate Disco 2 facelift.. You need a set of spigot rings that fit over the Disco 2 hub, that make sure the Disco 3 wheels are centralized correctly, these are about £8 a set off ebay, you will also need a set of Discovery 3 wheel nuts, the...

Driving home from Wales this afternoon in my Disco 2 Td5 i noticed my back windscreen started to look dirty, used the washers and it looked greasy... I could also smell diesel with the windows open. Got home three hrs later and the whole back end is covered in diesel, also the chassis and tow...

I bought a set of Discovery 2 wheel nuts, when I got them the thread size was bigger than the ones on my car, the heads look the same and take a 27mm socket, but the threads look like M16 compared to mine which look like M14. I contacted the guy who sold them, he said they are off his 03 reg...

I think I need to renew my PS pump, as I'm getting a constant droning noise that seems to get a bit louder when turning a corner. The noise is related directly to engine speed. Is there only 1 type of pump for the TD5 Discovery 2, I've seen some listed that say for 10P engine or 15P engine and...

That's the ABS, mine does exactly the same, you can feel the brake pedal pulse at the same time.

Hi, thanks for the info.. No the gaiter was knackered I found this when I removed it to replace it. The tie wraps were wrapped around the "thin" sections above and below the damper, and then a couple vertically between the top/bottom kind of clamping the top of the stick above the damper to the...

Hi, on the Discovery 2 gear stick... what does the "fat" bit in the middle do ? On mine this was all bound up with tape & tie wraps.. I took them off and it seems OK, is it just an anti-vibration coupling and do they fail very often ? Can they be replaced or would I be better just replacing...