like i said mine is is intermittent might not blow smoke for a few days weeks then it apears only on start up it a bit of a hit and miss with mine even on hot days so i know i can rule out glow plugs so i can only suggest a dribbly injector and this could depend on the position of the injector...

maybe worth checking your fuel pressure over the past few months mine started to blow some white smoke on engine start up even when the engine is warm and this is also intermittent ....white smoke with a miss only on start up only at first i thought maybe a dribbly injector and depending...

edit some how it duplicated post

some times you have to consider intake manifold some mitsubishu engines number 3 suffers the most on a 4 cylinder engine dispite they have glow plugs as the intake is off set the 4jx1 diesel is the same also the old d21 the td5 intake system is the exact same design as a volvo fh 16 no...

carbon also builds up more at the rear of the inlet manifold

well aware but i live in australia so i dont live in in cold climates also my engine has over 300000 on the clock glow plugs is least of my issues also some newer larger diesel engines that i mainly work on they dont have glow plugs or any heating element placed in the air intake these engines...

maybe an injector maybe ask wammers he seems to be the guru

correct some advanced turbo timers can also self adjust .depending how deep you want to go..... but a basic turbo timer can be set from 1 to 5 minutes depending on type of system many people will argue the fact that the stock td5 does not need a timer but they forget the the nature of a turbo...

not to sure if the engine is already up to operation temp in your vid so i cant comment cold engine i normally tend to watch my boost gauge and stay in low boost for a few minutes or as long as i can untill the engine is up to operating temps idle shut down is also very important for the turbo...

mine throws some slight black smoke on take off does this mean mine is chipped ? mine is an auto i also get some slight puff of black smoke on take off and when the transmission changes gear depending on load and heat of the day bearing in mind my injectors are not brand new either allong...

love the vid apart from the turbo shut down part add some LPG into the mix and it will blow your mind

can be removed or left in place the main objective is the blanking plate this will guarantee no inert gas leakage past the egr VALVE SEAT for a full delete ....well this up to you .....the EGR solenoids can also be turned off by unplugging them electronically as well as vac lines ... if you...

back to post # 28 you do not need instructions from me then you carry on about the maf ...as you where schooled on the egr valve like i say it apears you have bitten off more than you can chew even when solid data is been posted like i say please explain and pick the bones out of this vid...

i am sorry this was meant to be for wammers but your missing the point wammers asked why would he want to delete an egr then wammers carried on about the maf infortuannatly for wammers he bit off more than he can chew i only question him are you his dad

may i as what engines in your lorries as i work on roadtrains as well as very large plant equipment my self

so please explain to me ignition timing are are you going to tell me to bugger off again lets see

to the both numtys pick the bones

so please educated instead of telling me to bugger off

LOL wammers bring your freinds i like a fair fight obviously i see your 2 cents and was it worth it nope time to take you back to school also you are now involved so please explain what wammers is missing please explian compression ratios as it apears every diesel engine runs the same...

LOL love your humour now i will hit the like button do some research on compression ratio then come back and fill in the blanks i have some flowers to arrange