thanks all, did a bit of " greenery" removal yesterday. this am " key in pos 2" engine not running managed to talk to outstation on L H door and get windows to work again will keep trying for HEVAC

thanks again .dont understand much about electrics but will try ad see if anything obvious is apprrent

Thanks,it worked last week !!

thanks mate

Hi all,as title suggests my Nanocom talks to the EAS without problems but it wont talk to either the HEVAC or the door outstation . however 2 or 3 days ago it was ok with both. Is there any fuses that I should know about? Any assistance gratefully received. Thanks

all the best with your op, I will second the phisioterrorist comment

Yes according to what I have found out, it mimics pressing the pedal and runs the pump for short intervals to enable bleeding the rear brakes and the modulator. it also tests the circuit by holding the brakes ON for a time to enable you to check for leaks.

Thanks when I have finished what I am doing, I will contact them

Hi, I have the above in the boot of my DHSE, and do not know if it can be tested. the two speakers on the top are tatty round the edges but I believe that they can be replaced for a few pounds. I am missing the disc player but I will replace this Radio works ok and controls on wheel work. I...

Thought I finished it on post no8 .but obviously not sufficient for all.

why does everyone throw a mini fit if you ask a reasonable question.most were of the opinion to bleed the brakes manually which is what happened the morning after the question was asked. please just leave it alone now, you will be having a heart attack

thanks juke ,I know where they are, just no info on which button does what and what should I be looking for on the test ?

Thanks all

Hi, replaced all my brake pipes with "kunifer " pipework and intend to bleed the system, I have a Nanocom Which appears to have a brake bleeding facility on it, but I can find no information on how to use it. has anyone used theirs and can help Thanks

the top of the bag folds over the bottom plastic bit. you need strong fingers ,dry bag and dampfingers

Just completed the rebuild of the rear bumper mounts and side pieces. At last I can start the rebuild

LOOKS LIKE PAPER MILL ROPE.!

cant see a reason why not you may need a lot of smoke but its easier to see than compressed air.

Bastards who treat animals badly just want putting down No excuses

the 2008date is when the iso 9001 was certified not the manufacturing date