Length..... the head and block I'm running are actually from the Rover 75 CDTI - so the length shouldn't be a problem The over fuelling.... thats thet thing that I would be concerned about, but hoped as the Freebie has the VNT turbo, wouldn't the vnt give more air - especially as the turbois...

Very tempted.... I'm sure i read on here some last year, that it was a bad Idea and it would run like a pig!

Ok.. I know the manual has different injectors to the auto.. and I know the R 75 CDTI Injectors are again different. My Question. If I stuck the Rover 75 CTDI Auto Injectors into my M47R Freelander 2003 Pre Facelift SWB 4x4 Light Commercial - Any Ideas what I would expect from a performance and...

Hi.. It's a 2003 53Plate SWB 4x4 Light Commercial - owned since it was 2 yrs old - and previously owned by a business in Rotherham

Found this on the OSF Inner Wing, spot welded to the suspension mounting part of the inner wing. I'm trying to find the SV Tag with order number and build date - but can't see it anywhere. anyway... can anyone shed some light on this please?

I've not got around to doing it yet.... the other half has no car, so she is using it to commute... hopefully, this year will see the Hippo going into my freshly built garage (if the council allow me to build the flaming thing) My idea was to take the thing off... use a high tensile steel bolt...

Just bought a full set of Leather Seats with heaters built in, off eBay. very VERY good nick... the seats come with relays and I even blagged the switches from the dash... I know the wires are there, so I'm planning of fitting them this weekend. I even have the rear 70/30 split seat too... but...

I could always buy an eBay "Special" - buy the kit and rebuild one myself - if I'm confident - I can fit it... that way I have another to rebuild and either sell or keep as a spare unit!

I can get the kit cheap enough - about £83.00 for the kit from the site you mention....now all I need is a gearbox chappie to do the job for me.... - not something I would like to do myself to be honest.... i bet its only an hour or two in labor rates too!

Anyone any ideas what the bearing part number is that I should be looking for? - or... as I haven't stripped an IRD (only fitted the cooler) - should I consider buying another unit... I'm not scared of taking on a job I haven't done before, and if I have read it correctly, its not too...

Had a good day on it today... Replaced fuel injectors.. Looked at the seal.. there is a small amount of up and down movement on the inner cv going into the IRD. About 2 to 3 mm maximum. The infamous knock... I've worked on aboutique 4 of these where the suspension top or shocker knocks a...

ignore me.... there are two Part numbers on my injectors..... 049 are the ones fitted.... i should learn to open my eyes in future!!

old thread... but similar question... I have 2 injectors going down.... my part numbers end in 785 983. now according to "some" posts... these are not the right ones for a 2003/2004 TD4 M47R Engined Manual SUV Open Freebie.... or are they????? i have a full set of rover 75CDTI Injectors and I'm...

New shaft... old seal..... was carefully fitted at the time of the engine and box refit.... hopefully the IRD Diff bearings are not collapsing.... yes the Inner CV Clip went in fully and engaged.... it was a bitch to try and pull back out too.. (usual test for me to be honest.... if it pulls out...

Not REALLY a question for help, but more of a open discussion starter if anything. If you have followed any of my posts, you will know that I have rebuilt a freelander that my father left me before he passed away last year. when I said rebuilt.... - New Zero Miles Engine - New / Zero Miles...

I've followed the wiring to the door hinge, and linked out the Purple-Blue with the black, and the result is the same. although.... I've changed the bulb in the interior light, but it's on all of the time - wire linked out or not. The interior light ONLY GOES OUT when i press the button to lock...

finally after 3 to 4 months, I found where i had the BRAND NEW FULLY BUILT locking mechanism.... however; sadly; it hasn't fixed the tailgate glass issue.... although.... changing the mechanism and not looking for the SUV's rear boot light... that's another story!!

HI, Is there anyone traveling to-from Suffolk, who could collect a 19" wheel for me from Pettaugh please? I live in Nottinghamshire, but willing to ravel down the M1 if it raises my chances of having a friendly person collect for me.. either Friday 17th, or Mid to late next week. Willing to...

@Nodge68 - It's the same wire pal.... I took two pictures of the same thing.... thanks for letting me know...

OK... the prize of a used postage stamp on offer... In the boot, under the tools "door" - there is a connector and a damaged set of wires. anyone any clues?