1. pete12345

    P38A Air con compressor

    Cheers mine leaked so much overnight it’s only on the white section will refill then put on the proper gauge for a few while to make sure it’s holding pressure but still not sure I’ve that would stop the clutch on compressor from engaging I’ve not it must be my dodgy wiring but thanks for the info
  2. pete12345

    P38A Air con compressor

    Just changed the washer not leaking now holding pressure but no cooling gas left & only 17% in car so thinking not enough to make clutch kick in any advice much appreciated will get more refrigerant couple of days and try fill it right up I’ve doesn’t work then must be wires wrong way round will...
  3. pete12345

    P38A Air con compressor

    Here’s what mines got and brand new but helpful about that green white wire
  4. pete12345

    P38A Air con compressor

    I haven’t even got that bit there all I’ve got is the electrical connection
  5. pete12345

    P38A Air con compressor

    Can anyone tell me what is the live and negative on the denso compressor one black wire one white also the two wires from the harness to feed it one green &white the other black I’ve connected it up black to black but no clutch engagement saying that there is a leak out of one of the inlet pipes...
  6. pete12345

    P38A What mods, if any do you have? 🤔

    Dumped the x fat bird got newer skiny model much better on the airbags and compressor oh and also got rid of the side steps because newer model can step into the car without it being lowered all the time
  7. pete12345

    P38A Aircon compressor

    Cheers yer there different on the v8 thanks aj1954
  8. pete12345

    P38A Aircon compressor

    I didn’t know kurt did them I’ve brought from him before for the air bags still going strong cheers
  9. pete12345

    P38A Aircon compressor

    Could anyone tell me the make of the aircon compressor mines a 1999/2000 model v8 but I think there was a change of compressors about that time some places say marle others denso. Thanks for advice I’ve not will check with rimmer brothers with vin
  10. pete12345

    P38A Knocking noise what to change??

    Have a look on google there’s a fella on there that does it with a bearing rave and a power drill
  11. pete12345

    P38A Knocking noise what to change??

    I used jubilee clips and freezer
  12. pete12345

    P38A hi my p38 wont start bat went flat would only start before using eka code

    Key probaBly needs sync with car are batteries in key good what diag u got
  13. pete12345

    Happy fathers day - Battery warning light

    Congrats rubberknees you will have to sell the car to afford grandson 👍👍
  14. pete12345

    Range rover mot in 6 years

    Mine was the same mate been off the rd 2 years sailed through mot nearly all new underneath test station pleslently surprised
  15. pete12345

    What did you do with your Range Rover today

    Here’s my old rescue bloody missus found her in south wales been locked in a cage for for years just used for breeding badly treated nervous of everything when we got her at Xmas coming round slowly nearly as much as Range Rover to keep her healthy vet costs
  16. pete12345

    Becm problem

    +1 Rick best in the business
  17. pete12345

    What did you do with your Range Rover today

    Took for mot all good no adviseries
  18. pete12345

    P38A wheel bearings

    That’s an old post from 2017 mate start a new thread and I’m sure you’ll get plenty of advice
  19. pete12345

    P38A Airbag

    That’s the other option data but it will take time and I’ve still got to wait for a response from the company I’ve they contact me tomorrow that’s what I will do
  20. pete12345

    P38A Airbag

    Thanks I’ve one got one not far away I think I will contact them tomorrow