here is my old one,has severe cracking

For read www.myfreelander.co.uk/Engine/kengineprobs4.htm

And you need this remove the old thermostat and put it http://www.ebay.co.uk/itm/K-SERIES-PRT-Thermostat-Blanking-Plate-PEL000040-/222212129140?fits=Model%3AFreelander&hash=item33bce00174:g:4xwAAOSw7KJXENl4

Yes it is old one ,buy one on eBay or wherever you want but to be complete with hoses . http://www.ebay.co.uk/itm/FREELANDER-1-8-GENUINE-THERMOSTAT-REPLACEMENT-HOSE-PCH001190-/330813276624?hash=item4d060201d0:g:q1oAAOSw7NNUJDKS&_trksid=p2349526.m3874.l7936

Hello, what type of thermostat you have ? is the old version located close to water pump or is the new one located close to radiator ? ...i mean this

It is not the only one who complains of them ,i think is bad quality.If this thing is happening at 200 km h you go really fast to heaven or hell..... However,if i buy some spacer would be a quality product ...H&R .....EIBACH....HOFMANN.....a month ago i found a set a 4 wheel spacer made by...

H&R has a very good product quality ,but not buy no name product because look what happens .... http://www.gtr.co.uk/forum/167822-warning-aluminium-wheel-spacers.html

Prop Shaft Dampers are used to reduce or eliminate overlying rotational vibration that is transferred from the internal combustion engine to the drive shaft. For the design of a prop shaft damper, this means that the first stage is to find an appropriate installation location on the drive shaft...

I want to buy me a set of wheels for winter and found an offer that contains OZ Racing Superturismo WRC wheels and Bridgestone Blizzak tire .So someone used wheels from OZ on freelander ?....thanks

Man,it is between N/A Freelander and D-lander :rolleyes:

This thing is sick,man ........good job What do you think about RECARO seats ??

Remove 1. Remove air cleaner assembly. 2. Noting their fitted positions, disconnect 5 h.t. leads from distributor cap. 3. Loosen 2 screws securing distributor cap to engine. 4. Remove distributor cap. 5. Rotate engine to gain access to rotor arm screw. 6. Remove screw securing rotor arm to...

The rpm stay too high,maybe is CKP fault... If the CKP sensor fails, the malfunction indicator lamp on the instrument panel is illuminated. The ECM enters a default mode and uses signals from the needle lift sensor to enable the ECM to continue functioning but with a reduction in engine...

+1 They are of the same opinion ,freelander was not designed for FWD

Yes add to fuel ....partially empty tank (when red light is on ), add liqui moly and then full tank

Use some Liqui Moly Injection Reiniger this can really help

Not today but i made a custom battery clamp ..cnc cutting....stainless steel

I think the AT tires as a good compromise for all seasons ,currently use bridgestone dueler a/t

17" wheels tire is more expensive and limited,on 16" wheels have more choices for what you want .....but very important is recommended to not to exceed 5% difference in diameter....for example 216 65 16 vs 225 70 16 in my opinion this would be the limit

Very wrong information,is not for freelander......what is written in the picture is for Discovery 2 or P38 Your wheels are definitely 17" diameter ,for what you need is indicated 16" wheels ,gave a much wider tyre choice and a much cheaper price are better for off roading, more air inside the tire