Winu
Active Member
Fitted heated front screen today
Original loom from LR is used (pricey stuff to be honest - 150 pounds for couple of wires and 2 boxes)
, just a slight mod was needed, because stock hole for windscreen loom is used by PTC harness, so I need to re-route wires to plenum camber.
Then fit a switch in to centre console (all wires from switch to CCU and engine compartment are in place), and it works
Original loom from LR is used (pricey stuff to be honest - 150 pounds for couple of wires and 2 boxes)
, just a slight mod was needed, because stock hole for windscreen loom is used by PTC harness, so I need to re-route wires to plenum camber.
Then fit a switch in to centre console (all wires from switch to CCU and engine compartment are in place), and it works