Exhaust, engine mounts and engine mounts for a start

I've got a D1 R380 and a D1 autobox with transfer box, all of it done about 110-120,000 miles, I nicked the manual trnasfer box to go in my 300tdi-lt77, both vehicles were parked up years ago, one because there was a lot of electrical problems and the other due to brake master and servo...

Standard defender brakes, provided they working fine, are perfectly good enough for dailying/green laning, what ever you wish to do in it provided your not towing a huge caravan down long hills and on the brakes all the way down like some people seem to do I believe '90 is the year they changed...

I know about one of these crossmembers rotting right through at one end being followed closely by the other end, driver noticed quite a clunk when pulling away and braking and bumps etc. I could grab the end of it and waggle it about, this was on a 300TDI 1998 110

Did it fall out of the wheelbarrow?

22mm 6 sided not fit well enough? Did on my 300

I think there are master splines in the arm and on the output of the box, think theres 2 master splines 180 degrees apart so possibly would go on 180 degrees out but is obviously not this

Fine However you wont find me driving about in a car with battery cables that are likely to short

I would recommend ordering the ball joint already pressed into a new fulcrum bracket, as if your paying someone to replace the ball joint for you, said person will be out to lynch you after potentially quoting say... £100 to change it, and not realising how difficult it can be to get them out...

I'd encourage you to go and have a look at your tratter, and trace the battery cables very carefully, and spot any potential problems, and fix any problems or prevent any harm coming to your cables in the future Battery isolators are not for disconnecting them if you have a problem with the...

? I thought it was a pretty clear and straight forward question. Maybe read it next time

Just get some fairly small based seats, that have pretty basic mounting positions so you can make a frame to bolt the seat into the original holes, and try to do it so you can easily get to the bolts. Only a couple minutes to get a seat out, cant see why you'd need to ever want to get it their...

I want a third option on the toll.... leave as is as it's an old land rover and designed to be rubbin through farmers gates and through hedges

We you in a cleaner than hospital operating room environment when you disassambled the injection pump, and even when you removed the injector pipes etc

Has it still got a dsicovery temperature sender fitted in the thermostat housing

Just blip the starter really quickly? If your set on using that method that is

Engine mounts had it?

No need for jacking up, if the splines on the other corners are anything other than like new they'll pretty quickly go the same way, when they start to get sloppy they'll wear faster and faster

Yes thats gone, look at the other rear one and the fronts if your keen, then order 2 for the rears or 4 for every corner, make sure you order the right ones, then either get gaskets or a tube of gasket silicone of some description, I use granville high temp sillicone, comes in a pressurised can...

No problem, not worth having to explain everything twice