took mine off from top, took turbo to intercooler hose out for better acess. size 15 socket if I remember correctlly

I fitted a bush kit to the gearstick leavers, and changed all the worn plastic and rubber parts on the shifter search the internet for PG1 gear linkage bush kit, you'll find it. sorry but unable to upload images right now

has the diesel pump cover been off, it could cause the idler to be misplaced and cause "wrong fueling"

Yes, the top one is connected to the CD player under the passenger seat.

clock is not connected, here is mine, big black plug on top is from CD case "vertical" black plug on left is from clock

I've painted mine over 3 years ago and they still look "black" just got the bumpers off, gave them a good scrub, plastic primer and 3 coats of Matt Black from the spray can after painting today

the 3 door body kit looks good on it, you should consider painting the bumpers

L-series on the left, Td4 on the right

press the switch and push lever down, then it should light up, if not your's might have a snapped wire, very comun fault

lift kit, wheel spacers, ecu remapped, performance box, poly-bushes...

earth point to the chassis, all wires connected to it are black

as above, get the "good ones" or you'll be replacing them in just under a year as I am with last ones I got

Hello, found out this item (part code YNI500010) was fitted to commercial vehicles, but how? could this be a alternative way to open tailgate when it is stuck due to tailgate handle failure? thanks in advance Miguel Baptista

do you know any serial number / reference / part code for the kit? I've searched and lots for Defenders but can't find any kit for the Freelander,

that's a modification I'll be taking some pointers from

and lubricate the clutch lever shaft

is the "standard unit" the R770? if so could you share the instructions, I would like to fit a 3.5 aux in jack to it (and keep the CD multichanger box) but I'm lost in the process. thanks in advance.

sanded + 2 coats of plastic primer + 3 coats of matt black I don't know what software was used... It was printed in PLA, this was a trial and error process and the infill also shows a lot, final stage will be printing in ABS with 100% infill so it won't show as much layering and will be more...