Myles, I too have a 1987 MOD Ninety. Depending on model kit out...12v GS, 24v FFR etc., nearly all components are readily available. It's really worth getting to know the lrworkshop.com diagram pages as most components are shown/listed there. The MOD specific components are available from the...

You may like to try this very good wheel offset calculator - just type in data and it works out the clearance for you. https://www.1010tires.com/Tools/Wheel-Offset-Calculator

Fcuk me, that's a mess. Who does your maintenance and servicing? Suggest changing mechanic. Re' bearing race, a good sharp cold chisel and a 4lb lump hammer will do the job. Then give your hubs a thorough clean up, a coat of acid etch primer, a few coats of paint and a full rebuild...both sides.

Good Lord, let's hope Sir Jim and his marketing team get to grips with the colour pallet of the announced this week Ineos Fusilier :eek: https://ineosgrenadier.com/en/gb/news/introducing-the-ineos-fusilier

Yesterday took the old girl to the pub to meet with friends for lunch. Had a great lunchtime, then back home to give her a thorough clean...jet wash, snowfoam, sponge wash, jet wash rinse and dry off...including chassis, underside, wheel arches and engine bay. Rewind to October last year, two...

Also search on FB, there are 100's of Landy parts readily available and many folk breaking for parts too.

Turner are a great company, very good people with first rate parts supply...and proven component quality.

I'd pull the engine for easier/better access and they re-install very easily lining up on spigot and dowels/threads. It's horses for courses, you choose.

Just use Cortico seals, not the el cheapo jobbies.

See here https://www.lrworkshop.com/parts/ERC8450

As @tottot , it's a readily available unit and can be bought from many suppliers https://www.lrworkshop.com/parts/AMR4249

Best to 1. ensure right volume and type of oil is in gearbox, 2. just drive and monitor the oil level/gearbox. If no issues, carry on and enjoy.

Just make the bracket, it's but a small piece of metal.

If you're happy to make bracketry, the answer to your question is yes it will fit. The only additional point you need to modify is for the oil breather hose and you can do this by adding a take-off/breather hose connection stub to the air intake hose. Or, just run the breather to a catch tank.

Here's a Ninety 200Tdi air filter housing for comparison 200Tdi parts dia'. 2.5 TD

1. You need a wiring diag to work this through. 2. Hope your LED's are not the over bright cheapo Chinesium jobbies - if so, you'll be wearing sunglasses at night. 3. Remember LED's are diodes :. have polarity. Fit the wrong way and they won't work.

I can't help directly but really recommend you watch, and use as excellent technical reference, Mike at Britannica Restorations videos on all things Land Rovers. Go search YT and settle in for the evening/weekend/month/year. Similarly, use LRWorkshop's diagram link pages. These will show you...

Did you pre-test the wiring loom before installation? If not, you should have. Electrical fault finding is very straight forward, you either have 12v, or you don't. Check as follows noting you'll need to use the +Ve of your DVM to earth - this provides your closed 12v cct :. you have 12v... 1...

I see what you did there...

Works for me