Try shortening the tube you poke in the chassis , I had the same issue so Halved the tube and just drilled a couple extra holes in the chassis. I was using a no name gun and a smaller sealey compressor. I also managed to blow up a schutz canister, Jesus that was a mess…..

Well it passed the MOT yesterday. No advisories. To be fair I have only done 2000miles in it in the past year, what with surgery that took almost 5 months to recover from, a new baby, a house move, and insane work schedules - I just haven’t been able to drive it lol still pleased it passed :)

I did mine with a mate (my first time) a year ago - was actually much easier than I though using the timing kit, just double check everything and do a couple of manual test rotations to make sure it all works before you put it back together. most of the faff was the dismantling to get to it...

yep and as it on the cold airflow it will be fine mounted as is tbh

Yes fitted above the rear axle, just in front of it under the wheel arch on the drivers side of a 90

Could the the rubber joint between the top and bottom half of the actual gear stick has deteriorated. Mine was doing similar but not all the time, I just put a couple of blobs of weld to stop it rattling

Yeah i get around 30-31 mpg last time I checked it (ages ago!)

How much do you want for them ;)

Aah I see. Before spraying in the cavity wax, good idea

you won’t need to Hoover at the back, most compressors will easily blast cavity wax from the front to waay out the back. I would suggest a plastic tarp instead so you don’t end up with cavity wax all over your driveway!

LoF powermaster cylinder for the clutch. Transformed it overnight and means me with dodgy knees can keep driving the old girl!

a specialist is not a specialist when they actually say they are a specialist......

if its to go in an ex-mil land rover isnt that renactment?

I have a pair of the second ones in the photo (I got them secondhand cheap) and they are quite good but my biggest gripe is they are about an inch to narrow between the side bolster. admittedly that might be my build, I am 6ft2 and 110kg….. so if you are less wide than that they will probably...

You don’t use both. I use the copper washer and re-anneal it each time but you can use whatever you fancy - copper or fibre - they both do the same job

Haha it’s okay! I ordered the kit :)

details! Where did you get it from? my memory is ****

I have a bikini top from all wheel trim, had it a longtime and its great - don’t use it much mind but it’s a good bit of kit

Fed up with this sliding around in the back all the time, I finally fixed it to the side of the tub to store my tut in.

yes quite! No way would I take a garage on!