any help? 200 tdi defender flash of full beams not working. the full beams work fine but when i pull the arm towards me, nothing happens! what can i do? cheers Geo

yep hitting it with a hammer tid the trick! i tried it again on the other side(changing the wheels) and it came down properly, tho i did have to push it down before the pins swapped cheers for the help guys:) G

basically... my landy is stuck with one wheel in the air! i'm guessing there is more than 5kg on it:P any tips? i've dropped the mechanism and nothing happens... the handle goes up and down but the jack stays put!

HELP i have a T-max Farm jack that seems to only want to go UP. i've done what it says to get the cak to ratchet down but nothing happens!! what can i do?? cheers G

yer i prety much want a louder one to give a " get a move on" feel. lets be honest, the defender horns aren't amazing! i was thinking either a small ship's fog horn:) or a klaxon! i'm not sure tho. so how do i wire another one in?

Hi guys i want to wire in a second horn to my defender 200tdi 90 and was wondering how i should go about doing that? i dont want to remove the existing horn and i want to control the new horn from a seperate switch. anv advice is greatly appreciated! Cheers G

hi guys, i have 2 hours more or less and i was wondering if anyone had any worthwile ideas of jobs i could do to improve my 200 tdi... be it under the bonnet of inside, improving looks/comfort or performance. i've already changed the filters and oils so dont say that! cheers G

Hi guys i went to open my bonnet yesterday and found that the cable seems to be stuck i have a 200 tdi 90 and when i pull the cable it just stopps half way, as if that's as far as it's ever gone!! any tips on how i can het it open? cheers

So given the choice,if you had£60, would you bother getting one? Does it get enough use to be worthwile?- cheers

hi guys just wondering if anyone is using a cb radio and if so which one is a good value buy? i'm looking at getting one for off roading as a friend also has one but i was wondering how much you guys really use yours?! cheers george

cheers

i'm looking at doing the same thing and have a double suction cup lying about is it easier to use something like that? how exactly do you get the screen back in? cheers

hi guys, how o i actually get the park switch off the wiper moror? is it just pushed in? i dont wanna pull it if it's going to snal pr anything! have i missed a screw somewhere? cheers

depends where you want reverse to be! on a 200 the reverse is next to 1st gear, on a 300, it's where a 6th gear would be!

Hi All Just wondering if anyone has named their landy and if so what is it?? does it fit the description of the car? i have a red 90 and am told my the misus that it needs a name! any help? cheers

well i just picked one up for £1900, 70k on the clock and just gone through an mot. no nasty noises while driving and it's fine off road. it will need gome good all terrains and there is a fair ammount of rust but the chassis is fine all the way alomg. so i'd say... YES it is possible, but i...

cheers, i'll give the contacts a good clean tomoro, by the look of it( covered in mud, clay and dust) it will need a good clean... do i just pull it out? cheers

ok so i was mostly drilling out the rivets holding on the wheel carrier and didn't wanna drill through anything else. and by work i was giving at a general clean cos i've just bought it. also changing the oil and stuff like that. nothing major, i'm not claiming to know a lot about landys...i can...

i'm doing a fair bit of work under the bonnet today and it's annoying me, how do i just take i off? it's a 200 tdi defender. i also wanna drill out some rivets without drilling through the engine:P

oh yer sorry, it's a 1993 200tdi defender. does it just come out like a fuse? cheers