When I put my new chinesium bowls in I blathered them in grease. This was the first time I’d been back in there for something like five years and the grease is still good. 👍

Have a look in projects under ‘cheap Chinese diesel heater’

Not tax disc then 😂🤣😂

Let there be light 👍 God bless Mr Lucas and his invention of intermittent headlights. 😉

I found an old cracked spotlight and chucked that on the front valance. Turned out it was a fog light and slightly less bright than the full beam. Still. Looks awesome. 🤔

Woohoo. Just delivered. I’ll pop out and nail em on. 👍 Even the rain is only bouncing six inches 😳

I take it your suffering the same technical issue I seem to be encountering. It’s ruddy freezing 😳 The nearest I’ve got to doing anything is ordering headlights. They seem to have been held up in Christmas post. I do get to my little heated shed on occasion. This none stop rain ain’t helping...

I’ve never had any fitted. I’m not brave enough to get my 60 year old series in a situation where it leaves the ground. On any wheel. 😳

EBay do old reproduction discs for a few bob. Alternately you can search Google for a year and print it off but it’ll have a different reg number unless you have photoshop.

Still waiting for my headlights 😙 I’ll replace both and keep the other for a spare. It was getting a little difficult to see the light through the moss and lichen. Never keen on an upgrade. I like the dull orange glow. Bit like the welcome of a coal fire. With less smoke from coal obviously 😳

I replaced the bowls years ago with ‘metal most origin Lucas honourable prospective client’ ones. Just rip off copies 🙄 with a very badly applied Lucas stencil. I did blather them with grease before fitting the lamp. 😉

Mi headlights made a nice orange glow on the road just ahead. A tad close perhaps but to the left. Started looking different about five weeks ago. A little smaller and more circular. Seems one of them blew 😳 More sealed beam on their way. Let’s see if they can outlive me 🤣

Must say, this winter I’ve already used my heater more than every other year put together. Not sure if it’s me getting soft or it’s been colder. Still working great 👍

It’s all looking a bit Ukrainian 😧 Not completed the wiring as yet but back at work so it’s ready for connection when I return to shed duties.

More pallets brokid up today and made into racking but when the light got too low I retreated to the garden workshop with mi solar stuff and started wiring.

Between prepping the man cave 2 I’ve knocked up a box for the solar array. I’m using all the scraps and half paint tins as fast as I can as this has been relegated way down from practical to functional. Hence the chassis black for the inside and Iveco blue for thexterior. 😳

Think there should be a couple down the side anorl near the injectors. Pain in the arris when your adjusting the pump the loom always gets in the way of the rear nut 😳

I’d go for a short before looking at heat. There should be P clips right round the rout but it does touch the cylinder head between them.

Yours was in the correct location. There shouldn’t be anything approaching the temperature needed to melt a loom on that rout.

If anyone has a full set of series two hinges, preferably with the wing mirror holes, I have a crisp twenty pound note and a two finger kitkat at the ready. 🤔