is auto transmission fluid same as diff oil

sorted hose had the tiniest hole init which u couldn't see until i bent the hose

no everything ok checked oil etc all fine

hi yesterday my rangy 4.6hse dumped all its water i looked under car but couldn't find anything so i refilled it no loss just a slight drip from near thermo housing drove the car another 20miles still only a slight drip then my missus nipped down road a hour or so later and it dumped it all...

not a mot failure mine been lit past 12mths and it past a mot

sorted changed disks thanks

hi a couple of weeks ago my rangy started to juder when i braked i changed the front brake pads which where shagged.my problem is now when i drive at about 50-60 i can feel a shudder throught sterring wheel and if i brake at the same speed the hole car starts to shake violently but doesn't do it...

try halfords they sell single letters 1.99 i think

garage just phoned me diff knackered

electric passenger side wing mirror if you have one how much with postage

hi i have a 95 4.6hse the past week or so i have had a horrid vibration and clunkin noise i got told it was the wheel bearings so i have replaced both hubs on back cos it was easier than splitting them now i have a clunking noise coming from what sounds like the back passenger wheel it does it...

every now and again i get a eas problem and the car jacks up if i switch it off for a minute or two it will be ok again. I brought a reset cable off ebay so i could clear the faults only i don't know where to plug it in i thought it was under the passenger seat only the plug on the height sensor...

i brought my cable of ebay as i didn't know about your site

HI THANKS FOR THE REPLY IF I TAKE THE FUEL HOSE OFF AND TURN IT OVER HOW SHOULD THE PETROL COME OUT COS WHEN I DID IT IT DIDN'T COME OUT VERY FAST

HI can someone please help i have a RR classic 1988 with lpg conversion i have completly re built bottom half of engine piston rings mains big ends after i did it my rangy started and sounded lovely run it for a week,left it for a day then went to start it cos mot was due following day wouldn't...

i had the same problem on no4 cylinder turned out to be a broken piston ring