I am back here for some education and juicing up my knowledge about my P38. :rolleyes: It is dripping a few drops from the trans drain plug. I find it odd, as it didn't drip for 2 days after i re'newed my trans oil and filter + changed the sump gasket. Neither after my test runs However, it...

Im joining the sea division, so aint no borders im gonna get put at ;) We are in the eøs, no need joining the eu as they only want our oil money. we are in the nato anyhow, not like the many other scandinavians. Who knows maybe im a lazy bones and gets sent home :D im not the strongest...

I run them partially by law. I use them in the winter months were winter tires are a must, but im lowkey not paying stud taxes... I have to pay extra tax/fees using the road into the "main" citys, like normal roadposts wont charge enough.... I dont usually drive in the main citys tho so i...

But then again, if i really wanted a heavy duty AT tire, i'd go steel rim or some other rim to make it look solid and badass. But theese are mondials, so i dont wanna like make the tire stand to much out if you know what im saying. Since the mondials are so cooool, atleast on a black p38!

Here in Norway we usually use 2 sets aswell. maybe up north they only use winter tires dunno, never been there :D I don't need the snow marking on my summer tires, nay. It sure is an advantage (as you wont need to rush to swap to winter tires), but i've heard AT tires in general ain't...

Im unsure in what i should go for, the cooper discoverer has better fuel economy apparently, grabbers has the "advantage" with snow marking of their grabber AT3's.. 4 grabbers will be 200pounds more expensiver than discoverer. Also, the rims are 18 Mondial. Hows the noise level on the...

cheers. Do you perhaps have a picture?

Hello rangies, Bought myself a set of 18 inch mondial for my p38 97DSE. Im wondering what size tire is recomended. I’ve taken a look on Cooper discoverer which i believe was 235/45/18. Its for summer driving. Want the spiced up summer tires for some light offroading, mostly driving...

is LRT-60-004 just for Radius bushes? How does the ones for the panhard bushes look like? I don't know what you mean with compressing the leading edge @Datatek, it sounds like you want me to squeeze it to make it fit? i kinda want the best tool for the job, but not the most expensive tool...

what tool is advised for panhard bushes? /bushes in general? C clamp? Or is that not good enough? I am thinkering about investing in a 10 or a 12tonne press. But i've heard that 10 and 12 tonns might be, to little?

well, bugger. i dont have the 24mm 12edge socket, so i cant get the bolts off. New ones were normal edges tho. Would this indicate my bushings are stock from factory perhaps? ill have a look tru my reciepts, if they go so far back from previous owners.. It sure does look real old tho. I...

already paid 30 pounds for the oem bushes tho :D Is it not achievable in a vice with a small and a bigger recieve socket? Also, do you grease up the eye before mounting new ones?

Changed it now :) It cured my LED lights flashing rapidly and pulsation whilst turning on other applications. It also cured my temperature gauge always staying in the red after it warmed up to operating temp, FINALLY a solution to this problem :D I had to remove fusebox, and alarm siren to...

Hello, it is me mr always getting the bs :rolleyes::D It took some time getting off the ass, but im back. Ive driven with goblin electronics for a while, culprint bad earth? Eho knows, maybe? anyhow is this battery earth lead OEM? The picture is in middle of the cables whole length. Plants down...

not damaged

might do that Aswell. Its like changing the ujoints. You get a new axle with 2 new joints for 50-60£ more. I paid 40£ for just one silly uj. It was in Norway tho. It was needed quick. i dont think my rim is bent tbh. It suddently became a problem, and i guess i’d feel it if the rim gets a...

ok, just read the procedure on Rave. Looks fair. I guess its just to jack it up and get some axle stands under the axle. Then just brute force all thoose bolts off, probably gonna soak them with magic juice first before attempting. Im probably just gonna order new bolts and nuts for it as its...

Ok just to update, if i kick both rear wheelss inwards i get a smalll movement and a mechanical. Clunky clunk so i guess it is the panhard, but its on its last life? Are there bushings on the radius arms aswell as they take foreward/backwards movements of axle ay? Its fekin snow everywere now...

Just digged into the new dynamos packing, mmm mmm does it not look nice comparing new to yeeeeeeears old car parts. It has a volt setpoint of 14.42 so i guess im swapping out the regulator with the 14.7 one. Isn't it weird how they don't increase the setpoint if its so much better with 14.7...

In norway we have taxfree diesel (colored), and diesel :rolleyes: Ain't no premium here. We have 95 octane, and 98 octane. Probably some weird Shell Super 95 and super 98 but i never fill at shell anyhow... Only diesel difference i know is in the North were they have winter diesel. i suppose...