No way, the seats were cr@p very hard compared to the L322 and they weren't recovered not comfy at all.:D

Defo sheds, my p38 4.6 hse shed the leather seats was not leather on the side part of the seat imitation leather. sheds,sheds,sheds.:D

Ak speedo is your man i done mine a few weeks ago easy peasy 17 quid i think, i hope this helps.

Hi all UPDATE Changed the gearbox oil for the second time today and it luuuvly all is good. Ta Kaz

like it :D

:p:D

shhhhh :Daslong as you think what you are doing and take your time anything is possible :eek: :D:D

Only if you are cheep i have just had a new drive :D

Don't worry mate i will back you up :D

Ant, i done that when i got home from work yesterday, opened the filler hole and about 1/3 of a pint came out :eek: anyway this morning i put it into drive and it engaged straightway :D happy days so guess the problem was due to not getting the level right with the temperature of the oil,so i...

Ant, i have a laser thermometer at work i will borrow that then.

I only have allcomms It only takes me 10mins to get home from work so if i drain of the access that should be ok then.

In RAVE it says :- The gearbox fluid level must only be checked when the temperature of the fluid is between 35c-45c the reading obtained will be incorrect if the fluid is outside this temperature range. Is this normal opperating temperature as i have no way of getting these readings....?

I like it thats a good idea thanks fella :)

I have 2 4ft planks, if i butt up the planks and put the trolly jack on topput of the ply do you think that would be ok ?

I have a sheet of 18mm marine ply at work

I am still here just taking in all the advice, went to LR show at billing today to see if i could get some decent car ramps, what a load of cra? That was full of pikies :eek:. Keep the advice coming lads i don't need to knackerup me new drive it's only 27 yrs to get it :rolleyes:

ok thanks Av you got blocks ?

ok cheers Keith will do

Hi all I have just had a new drive block pathed and my question is do you jack your RR up on your block pathing, do you put planks under the trolly jack and axle stands to spread the waight. thanks kaz