Aweomse Thanks Ali

I might actually do the same as you Alibro i have some left over epoxy resin and talc powder in the shed to make a nice thick glue mix, How much did u relocate the hole back in millimeters so i can do the same without riding the clutch? cheers

Thanks Alibro i have a lathe i was going to take some measurements and make a aluminium sleeve to slide in there Did your mod work?

Its cost me AUD $1800 and i cant even sell it for AUD $1000 had a guy from the UK look at it the other day and walk away because of the gearbox crunch he mentioned it went into all gears ok but reverse was grinding When i removed the master cylinder i broke the little black plastic clip that...

Lrdirect is where i got my clutch kit from but there web site is really hard to navigate than it sends u to a parts list page and u cant click on anything They pretty much have nothing for my car can u recommend another site? I used google to search for my master/slave cylinder and it came up...

Whats your thoughts guys I'm in the car at AUD$1800 already it needs a AUD$290 windscreen replacement, Registration inspection AUD $50, Registration AUD$1000, New genuine master slave and bracket AUD$400 to $500 am i just sinking money into a worthless money pit? the car also blows a little...

Back at it again guys the car is grinding to go in reverse bugger

Here is the other picture

Here are two pictures of the numbers on the pump, the L series does have limp mode

According to two info videos based on the L series FL on youtube this model does have limp home mode and my ABS light is on which might trigger the LHM which is the effect im seeing on the peddle

Forgot to ask what will it cost to set the pump timing?

I wiĺl check it tomorrow guys its midnight here, i was about to get the mot done but realised the cracked windscreen wont pass the safety inspection What kind of kilometers are u guys getting to a full tank of diesel out of the L Series? The winscreen repair and 12 months mot is going to cost...

Can someone please point me in the direction of check the timing? i can't even find a cheap downloadable manual only hard copies online in Aus

It looks like the injection pump has been swapped at some stage the new aluminium look stands out from the rest of the engine

So glad the cops didn't fine me they drove off and into my street to make sure i was going home lol when i mentioned the car feels sluggish i meant there is a lot of nothing in the throttle peddle it goes over 50 percent down before it actually starts to rev the engine where as the xtrail is...

The last seller left a brand new slave mount in the boot to tonight armed with a torch i rolled under the car and seen my old modified slave mount was bent on one side by around 2 to 3mm so i put the new mount on and took her for a drive no MOT yet and the cops grabbed me 300 meters from my...

Just about in tears i just tried driving the car and nothing has changed it still wont change gears after all this work, what do i do now?

I just got all my lights working surprizingly someone had moreved half of the globes and didn't bother replacing them so i took some out of my trailer, i tested the clutch in the driveway and it worked for 1st and reverse however the clutch bites just off the floor but i'm sure i can live with...

Ok for a final post on this subject the car is now finally done and she starts up strait away the problem was 2 people pulling the car apart and 2 months between pulling it apart and putting it back together my cousin removed the engine mount and starter motor and he also reinstalled both, there...

Well i installed the starter kit today and same problem, if i hook up jumper cables from the battery to the starter motor than bridge the little tab the engine cranks over i just tried another battery and nothing happened same problem, can someone tell me which one is the starter motor relay...