I had a mobile mechanic come out to my house and diagnose righthand height sensor saved alot of time finding the problem.

I put dunlops on mine about 4 to 5 years ago still going strong although i just replaced height sensors again which i changed when i done the rear air suspension.

Update. I replaced both height sensors yesterday so fun day in the snow and air suspension now working and really smooth to drive compared to before.

Just had mobile mechanic plug in his diagnostics and clear all faults the only one that kept coming back was the right height sensor.

Car has been sitting for over 24 hr started it up car lifted and holding height so switch it off and still holding its height

I have couldn't see any leaks. I have bit the bullet and got a mobile diagnostics techy coming out on monday to try and diagnose the problem.

Replaced compressor today suspension raised stayed up for about 10 minutes and lowered back on the bump stops again and comressor stopped working again so booked for diagnostics on monday morning.

Still waiting for the parts to arrive . I have also noticed the seller is also including the slabs unit but hopefully not required but biketeacherdave has made me think about stripping and trying to repair the compressor that is on there as a spare.

I have ordered a used compressor so hopefully it works fine.

Update sprayed soapy water on compressor valves and airbags no signs of leaks but although compressor worked after first startup i couldn't get it to work after that now the backend is on the wheels and won't lift nor will compressor work relay and fuse checked and all ok there was a bit of heat...

I'm going to check airbags for ths tobe sure but it holds height when parked up and only drops when i start engine thats why I'm suspecting it may be something else as when i had to change them last time it dropped it's backend when it was parked. Thanks for your replys.it has sat overnight and...

Compressor Seems to cut out as normal and is quiet just abit odd it holds height until engine is started but i will be taking cover off tomorrow to check compressor. I had to drive back from Wakefield to south wales yesterday and it was fine on motorway it did drop twice driving through...

Have you checked filter on intank fuel pump it will keep running if it can't pressurise fuel system propperly i have had this and it eventually burnt fuel pump out because filter was blocked.

I have an issue with air suspension on 2000 discovery td5 it lowers when i start engine from normal height to its bump stops and after about 10 minutes it returns to normal height. I changed air bags about 4 years ago and height sensors at the same time i dont think it's air bags as it holds its...

There is a filter on the intank fuel pump that can get blocked also check fuel pressure regulator as i have had problems with both these in the past.

i used to work for a Rover dealership during the BMW ownership Freelander was originally meant as a Rover family car but BMW wanted as a small 4x4 so they were to blame for the cockup with Freelander 1. I don't class freelander 1 as proper land rover as it wasn't originally designed tobe a land...

Recent work done on my d2. Replaced 2 wheel hubs. Changed front shocks to gas shocks replaced pads front and back to ebc pads regassed aircon. replaced fuel pressure regulator again. replaced oil sump gasket. replaced aircon fan behind grill. Removed and revealed sunroof. Replaced drive belt...

I have put ebc pads on as they are supposed to reduce brake dust and they seem to work well bought them on flea bay a lot better than my local parts shop supplied pads.

I changed my hub it also came up with intermittent signal. Normally flagged up fault on turning steering wheel I put it down to faulty abs ring. second time on that corner I replaced hub now all working fine.

Yesterday changed front hub and brake pads and now getting rumble from axle more noticeable from about 40mph checked wheels and topped up axle oil but no change and I can't hear anything with wheels off the road although I'm thinking it maybe from the diff or the hub that I put on so may put old...