got my extrem ARB today. has any one fitted them. I have a U clamp for the bars to attach to the chassis, one end of the clamp has a bolt hole the other a plate piece which looks like it slots into some thing. I havent had time yet tonight to look under the car. I will try and post a picture...

sorry langer ive already bought the extreme bars just got to work out how to fit them

whats a low plip battery I will have to look this one up

warning noise is coming from the dash and there is no light. I will check the light see if one is not working.

hi Ive been occasionally getting beeps but no warning lights on me 2000 td5 disco. Usaually when setting of beeping starts for about 2 miles then stops. No lose of engine power all seems ok. Any one had this. ive only had it twice i will try and get more info next time it happens :alien::alien:

great news I have used LR techs for help before they are good to get advice from. Hope you get it fixed soon

Sorry different series you have a diso 2 I dont think this is the same problem. If the lock is sticky may be worth removing it and cleaning it. No good using wd40 as this won't remove or loosen un the old sticky grease. Try using a grease remover like gunk or jeez if you can't get this white...

I have now ordered ARB kit from Extreme4x4. They seem realy helpfull and said the bars will bolt onto were the old ACE fits. I hope so as it will make the job a lot easyer. Anyone fitted these bars from Extreme any advice would be great

my dad 300 series had the same problem. Is it that the locks look like they have opened but you need to pull the lock up a bit to open the door. This is caused by the internal spring on the lock. very easy to change. sold on ebay with instructions and I changed all of my dads ones and he has had...

hello all Just one thing you do have to be careful on with diesel engines, if you advance the fuel to much you will have a hotter detonation in the piston chamber were the glow plug sits. Over time this will melt the piston crown cause more piston slap and finally destroy the engine. I have...

Be care full leaving the log book as a van not an estate, if you enter a Low emission zone after jan as a van you will get charged £100 a day, you can easily get this changed and will benifit you when you sell it on. You may not live in a low emission zone, but if on holiday you entre a city...

for 30 would replace them not worth muking around with seal kits as you will have to spend some tedias time cleaning the pistons and then trying to get it all back working with out any leaks, and if it leaks on your wills for some time you will end up will corrosion as you probably know

If its coming out of the expansion over flow its most probably over boiling. This is usally a case of the cap not sealing properly as the system is suppose to be pressurised. Once pressurised water boils at a higher temperature. I noticed you have bought a cap good first place to start. Also...

I agree with disco above you are better of not claiming on insurance, its just there for other users that you may hit. You never get a good deal for the money they still from you over the years. My friend had his stolen but when he wrote the spec down they said he didn't mention about the...

Thought it was worth a look. I looked at my old forum and I put down exatly what you said. I was getting up to 4000 rev with little more forward acceleration. However I was moving. If your getting 3000 and no movment then I would expect it to be a gear box issue. Seeing as both the gear bos and...

Ordered the kit from Extreme 4x4 will be here during the week. talked to there tech guy he says its really easy to fit bolts onto were the old ACE was. Hope so will update when ive fitted them

:eek::eek:Cheers martin good point, I have spoke to LR and they say there is no problems as the coils can be fitted to 7 seater. I have no choice seeing al last person removed and fitted coils. The advantage I have got is that he fitted airlift 1000 in side them which work really well. Even with...

Spoke to extreme and they sell a kit to replace the ACE, has any one fitted one of these. They don't come with instructions so wondering if they bolt onto were the old ACE bars are or do i have to drill the chassis. Any one got a picture of the original arbs or extreme ones fitted will be a...

I had this same proble with my old TD5 I thought it was all sort of exspensive problems. I could not get up steep hills with out flooring it and only getting approx 30 MPH. It turned out to be the wast gate arm to the turbo had disconnected. I reconnected it fitted a boost gauge and all was ok...

We should make a goverment of 4x4 lovers then the world will be rosy