my dad 300 series had the same problem. Is it that the locks look like they have opened but you need to pull the lock up a bit to open the door. This is caused by the internal spring on the lock. very easy to change. sold on ebay with instructions and I changed all of my dads ones and he has had no trouble since.
Good luck
Good luck
Sorry different series you have a diso 2 I dont think this is the same problem. If the lock is sticky may be worth removing it and cleaning it. No good using wd40 as this won't remove or loosen un the old sticky grease. Try using a grease remover like gunk or jeez if you can't get this white spirit may work. Also remove the back tail door cover check nothing is obstructing the lock solinoid
battenberg
Well-Known Member
Disco 200 and 300 locks are completley different from SeriesII Disco locks, no replaceable springs in a disco2 lock.
You need a new lock, a lazy one will just eventually fail then you are in trouble, as there is no keyhole!
You need a new lock, a lazy one will just eventually fail then you are in trouble, as there is no keyhole!
