Checked it today it's not dragging or holding at all

yes mines the later one with both egr and maf I'll give it a try thanks

I have hawkeye and it's not showing any fault codes

When putting it on the ramps the weekend I found it not really wanting to pull in drive either

It's looking like my map sensor is faulty as I was told to check pin 1 and it should have around 1.8v and mines only showing 0.5v you think this could be causing my problems

I've fitted the fuse 11 today and the car revs free when selecting reverse . But I did notice yesterday when putting the car on the ramps in drive it didnt want to move off in drive either very well so I selected lo range and used that to get it on . I'm wondering if what ever it is . Is related...

Well that's the noise then any idea how much they are new or 2nd hand or much of a job to change . And found the reason the revs where changing with break cleaner theres a clip missing out of the black duct that has inter cooler on it

Could be around that area I'm pulling the inlet off later . Why you ask about injector 4

I've got a feeling it could be to do with the fuel leaking into that multi plug as I seemed to be around that area when it was getting lumpy then better and the noise stopped . What parts will I need to replace to pull the inlet off

Had a loud buzzing type noise start on the car tonight . Found number 5 spill pipe to be leaking after I changed it the noise was still there but when I sprayed brake cleaner under there the car ran a little lumpy then the noise stopped but returned after about 30 seconds and I repeated this a...

I'll have a look over the weekend and report back to you thanks for your help

How will I be able to tell

What will doing this show me ?

I'd say about 1600rpm low range does help still same amount of revs though

It wont rev free no it's like when you select reverse it gets restricted

Yes level all ok

Was like a dark red

Oh sorry . The fluids new

Mines a auto

I'm still trying to track down the issue with my p38 has plenty power in all forward gears but put it in reverse and it wont even get you up a small kerb stone