Hi Yes I did. I bought a used ECU and that seemed to cure the idle problem but I had a bit of rough running mid range. I fitted some new plug leads and dis cap and it's been running really nicely. Hope this helps you and I really should have posted the results earllier. Regards Mik

I bought a new battery a couple of weeks ago when I was in Leeds the old one gave up. When you disconnect the battery you may lose the window radio and key fob but maybe not all of them. It's only a few mins to reset them all. As wills said make sure the keys aren't in the car and a door or...

You will Need to reset your windows, radio code and key fobs. Your battery is the oem one and in my opinion the best one to go for. Regards Mik

Hi You can get a oem battery from a franchise for about £85 + the old wear and tear. I have just fitted a 110ah to my car I connected my jump starter to the leads before disconnecting and so didn't lose all the settings. Regards Mik

Hi Look at these people maybe give them a call COMMON ECU FAILURES ON RANGE ROVER, CITROEN, MITSUBISHI AND OTHER EUROPEAN AND ASIAN CARS. Did the garage look at the becm on testbook or similar? Regards Mik

Hi thanks for the replies. Jamie I have tried for a week to reset the window but it won't set.Wills there is no clunking or mechanical sounds and the window is level. The only thing is when the window is fully up or fully down and you press the switch there is a slight click as if the motor...

Hi Dosn't any body have any ideas on this one it would be very helpfull to get a bit of input. Regards Mik

Hi The left hand front window stopped doing it's one touch thing and is proving impossible to set. It works normally without any undue noise but just will not set. Also the left hand rear works when it wants. Will it be a faulty switchpack? Regards Mik

Hi. Which Pirelli's have you fitted? I have Scorpion S/T's on at the moment but they aren't available anymore. The STR's seem to be very road biased and although I drive mostly road miles I don't fancy being stuck in a bit of snow. Regards Mik

Hi Anyone got any comments on 18" TOYO A/T's. What are they like on the road? Regards Mik

Hello I have a rear suspension problem on my P38. When I drive over short bumps there is a clank from the rear left side. If I get under the car and rock the chassis it seems to come from the air spring (15 months old 18000mls.). There is nothing much else around there that could produce the...

Hi In Rave go into PDI Maintenance and you will get a maintenance form. Regards Mik

Hi What's wrong with it? I have read a few posts on other forums from people opening them up but it looks a bit on the tricky side. Look on here COMMON ECU FAILURES ON RANGE ROVER, CITROEN, MITSUBISHI AND OTHER EUROPEAN AND ASIAN CARS. they are pretty helpfull on the phone. Regards Mik

Hello I have a problem with my HEVAC. The test book symbol came on and so I hooked it up to my RCL and got the fault "(4) THE RIGHT HAND BLEND MOTOR SHORT CIRCUIT TO POSITIVE" I cleared the fault and tried to force the motor to both extremes and then recalibrated them. It was ok for about 12km...

Hello Has anyone had their windscreen replaced by Carglass and if so what sort of job did they do? My P38's screen has a crack and I don't know if it would be better to go to Carglass (insurers pay them direct) or to go to a main dealer (I pay and then wait for the insurer to reimbourse me)...

Hi Try front page Regards Mik

Hi Is it a Classic? I had a similar problem on my Classic and finally solved it by doing the swivel pin preloads. Regards Mik

Hi If the book sign comes on it should register on hevac comp. Did the garage hook it up to Testbook, Autologic or something similar. I bought Rovercom Lite when I bought my P38 a year ago. I june the book came on and it was the left hand blend motor. I cleared the fault but it returned so the...

Hello I wonder if anyone can help me on this. My 3.5 efi will not idle when it is hot. It is ok at start up but once it reaches working temp it starts to idle erratically ie tacho swings from nearly zero to 500rpm. Any ideas? Regards and a Happy New Year. Mik

Hi yes it does. If you run it on say Rovacom you will be able to read the fault code and also force all the values to check what everything is doing. Regards Mik