HI Everyting the garage has done is very easy to do yourself. I service mine evey 6 months and it costs me about 70 pound and i know it is done correctly, dont forget to ask them if they have changed your crank case breather filter, very important. As said, get yourself some decent tools (50...

Hi, any one got some fitting instructions for the soft a bar, got the bolts and brackets but no instructions, think it may have had a template. cheers.

The fuel filter is a pig of a job but i found that its easier to drop the complete unit, ie, the pump and the filter and take it to a vice to get the filter out, just remember where the connections go and dont forget the small earth wire thats connected to the side. Done three times now and got...

Hi. I had same problem with my td4 when i first got it, cleaned the air flow sensor and it sorted the problem, you can get the air flow cleaner off the net or use an electrical conntact cleaner, I would also try new turbo pipes if not alreadey done so and blank the erg valve off, easey job and...

Can enyone help in finding a bull bar fitting kit, i think it just fits under the engine tray and onto the bumper, any ideas. thanks

My clutch lasted 54000 miles before going. Cost 550 to replace the clutch, slave and master cylinder. pete.

The slave cylinder and master cylinder are not one unit on the TD4, The gearbox has to be dropped to allow access to the slave cylinder which is located inside the bell housing, unlike the slave on a petrol which is on the outside of the housing and much easier to change. I had mine changed...

Has any one fitted a roverron mafam and if so did the engine management light come on afterwards? how long did it take for it to go off, says on the instructions that this may happen and i have turned it down a bit but it is still on, small price to pay as the car feels like it has had a new...

Hi Rob. The maf sensor is next to the air filter, just behind the oil filer cap, you will need to remove the plastic engine covers to get to it, just found this picture on the site, (forget about the arrows, yellow and red). The maf is at the very bottom left hand corner of the picture at the...

I had a great time in the snow today, found a track about 6 miles long, no one else around for miles and she handled faultlessly, i did however pass 2 cars in the ditch on the way there.

As people are saying, do it your self, very easy, enjoyable and saves a fortune, and you know its done right. I service my TD4 every 6 months to keep it running well, costs me about £60, for that i change the oil, oil filter, air filter, crankcase filter, flush the engine, change the gear box...

Hi, The air filter is at the back of the engine at the top, you need to remove the top plastic cover to get to it, also try adding millers diesel sport for fuel, that seems to give more mpg, about 10 pound a bottle which lasts about 10 full tanks. pete.

Hi Dave, It says in the workshop book to change every 5 years but i would advise every 2 years, thats about every 20k. I have changed my filter twice, the first time it took about 2 hours as the nuts and bolts where stiff has it had never been changed and i tried to change it while the pump and...

Sorry, forgot to say its a TD4.

Has any one tried the maf cleaner which you can buy from demon tuning, does it make any difference or is it a waste of time trying to clean the maf. thanks.

Mings right , its was, just fitted a new one for 120 pound and it started firt time. cheers.

I noticed a humming sound from the fuel pump area while driving a few days ago which has got louder today,The sound was much louder than a normal pump sound, The car drove fine untill i stoped and turned the engine off, now it turns over but will not start, is this going to be a faulty fuel...

When i changed all of my hoses and filters the engine made a differant noise than it did before so it my be that it is just running better, also you do not mention the most important filter, the crank case filter, did you change that at the same time, needs doing every 12 months or the turbo may...

Dont think i will be getin the (BRITOOL 16 DRAWER TOOL CART PLUS 470 PIECE TOOLKIT). Think i will ask her to get me some millers diesel power sport 4 and hope that keeps it going.:(

Wifes buying me a socket set for crimbo, whats the best size range for the freelander and a good make. thanks.:confused: