1. T

    pay and play tomorrow sunday 3rd

    sorry lads be off line i had one sunday i`ll keep you posted
  2. T

    disco axle

    i think it`s around a 85 range my discos a 92 200 tdi cheers
  3. T

    disco axle

    does anyone now if the shafts and cvs from a range rover axle fit a disco? cheers
  4. T

    parts for 1997 range rover required

    your in luck m8 i have it all;) i go away tonite so make me an offer;)
  5. T

    help on sum torque settings plz

    cheers m8
  6. T

    help on sum torque settings plz

    have you got a link m8 plz as i was given mine on disc cheers
  7. T

    help on sum torque settings plz

    hi guys iv`e lost my rave cd can`t find it anywere and i need sum torque settings right iv`e had to rebuildr my heads on my 4,6 v8 1997 model need the head bolt settings the rocker shaft and rocker cover settings and the pelium chamber setting if anyopne can help be very gratefull;)
  8. T

    p38a lpg info required

    ;)
  9. T

    p38a lpg info required

    glad your sorted m8 got my sorted today as well down to air filter and plugs make sure you keep an eye on ya air filter as well m8 might well be worth changing it as that was mostly my problem;)
  10. T

    p38a lpg info required

    :eek: hi guys funny things these lpgs i have one on my rangy 4.6 the same iv`e always had a loss of power on the gas compared to petrol over the last week though iv`e been having a lot of trouble with mine it pops back like it`s missing and the smell of gas from the exuast is really strong iv`e...
  11. T

    4.0 SE / 4.6 HSE Range Rover

    i have a 4.6 on lpg i get around 215miles on a tank of gas which is the spare wheel well type which costs between 25 to 28 pounds depending were i fill which is 70 litres hope this helps
  12. T

    Crank Position Sensor Location?

    i had the same miss fire on my old p38 but mine was a cylinder down but i`d go for the coil pack normally when you get trouble with you crank sensor it will stop and not run but sometimes the crank sensor will break down when hot then when left to cool it will run again to get to the sensor the...
  13. T

    Crank Position Sensor Location?

    your right m8 it`s at the back by the flywheel if you have a look at the back of the cylinder head on the passenger side on the back of the head between the head and bulkhead should be a blue plug there this is the plug for the sensor so follow the wire down to the sensor if i rember right it`s...
  14. T

    sport 2007 headlights

    m8 i haven`t thanks for that i`ll give im a shout tomorrow thanx alot for your help i`m very gratefull;)
  15. T

    sport 2007 headlights

    thanks for that m8 iv`e already contacted rogersons and they will help if i send my lights to them they`ll convert for 300 quid but there in lancashire i`m in wolverhampton have asked if i could take the car there for the day and if they`d sell me the wiring diagram but iv`e heard nothing back...
  16. T

    sport 2007 headlights

    does anyone have any ideas on the wiring in the 2007 sport headlight units using them to do a p38 conversion but stuck on the main headlight and main beam:confused:
  17. T

    Help - Choose my wheels for me

    i`ll post one tomorrow m8 the rides not that bad just a little bit shaky in the ruts on the motorway ;)
  18. T

    bit of help plz guys

    cheers m8 i`ll check it out now;)
  19. T

    me at coney green worcestershire

    not if you run em m8;)
  20. T

    bit of help plz guys

    :confused: