1. Spot1

    Spots Disco 2 ES Premium project.

    Well, how the world has changes since my last post! Covid-19 is here and everyone should be in lockdown... What this means to me is that working for an NHS Ambulance service, actually on the 999 ambulances I am now literally putting my life on the line with every shift that I do. So far, so...
  2. Spot1

    Disco 2 Different ride heights

    Just a quick update on this for anyone else that sees this, I ordered a couple more sensors from JSG4x4 and still had issues on the left side so ordered replacement sensor plugs which sorted the issue.
  3. Spot1

    Spots Disco 2 ES Premium project.

    Another busy afternoon attacking the headlining... not quite as bad as I expected it to be! The old lining came away easily enough The biggest pig of a job was scrubbing off the foam backing from the original. A good wire brush does the job well but felt like I had w**k**s cramps for...
  4. Spot1

    Spots Disco 2 ES Premium project.

    More of a cosmetic job today, turning the switches blue! Before; After; It’s not difficult, just fiddly. Remove each switch and open it up and cut away the green 3mm LED and replace it with a blue one; I was planning to replace the amber ones with red but there wasn’t the space to fit...
  5. Spot1

    Disco 2 Different ride heights

    That’ll teach me for thinking that Land Rover would put all the settings for the SLS under the SLabs section... thanks for that, I’m working tomorrow but I’ll get it plugged back in on Tuesday and check under the BCU settings. I shall report back once I’ve swapped the sensors. Thank you very...
  6. Spot1

    Disco 2 Different ride heights

    Both sensors are new but unbranded... in hindsight I need to swap them over and see if they’re giving the same readings. https://rover.ebay.com/rover/0/0/0?mpre=https%3A%2F%2Fwww.ebay.co.uk%2Fulk%2Fitm%2F202772133523 It’s lights 2 & 4 below. Yes, it’s set to air. Is there a fuse that would...
  7. Spot1

    Disco 2 Different ride heights

    I’m in the process of trying to revert to air suspension as I want the auto levelling. The compressor is building pressure and all the valves seem to be working fine through nanocom. I am yet to actually install the airbags as I want to get the system all running before I do that. I’m having...
  8. Spot1

    Disco 2 SLS sensor location.

    You’re a star! Thank you for your time and help! :):)
  9. Spot1

    Disco 2 SLS sensor location.

    Thank you @sierrafery that just the sort of thing I was hoping for! I don’t suppose you know how much stand off there is from the chassis? Thank you for the support! This was my truck at the end of the last stage show I did...
  10. Spot1

    Disco 2 SLS sensor location.

    I’ve been gathering parts to return my ‘04 ES Premium to air on the rear after a previous owner replaced them with springs. I’m not interested in the spring/air discussions, I want it back on air for the self levelling for when I load it up. When I went to replace the sensors I realised that...
  11. Spot1

    Spots Disco 2 ES Premium project.

    Well that's f*****g annoying! In preparation for returning to air suspension I’ve ordered two new height sensors which arrived last week but due to being in work I had to collect them from the post office which I did today. I got home, got the jack out and whipped off one wheel thinking it was...
  12. Spot1

    Spots Disco 2 ES Premium project.

    Thanks! The plate was pure luck but I like it. I had factored in £300 for a private plate that would hide the age when I was looking for a D2 but when I saw it I couldn’t possibly change it!
  13. Spot1

    Spots Disco 2 ES Premium project.

    Another job that should have been simple... I had the new ‘timing case seal’ breather kit arrive yesterday so decided to fit it today before a late shift in work. https://fourby.co.uk/epages/950004277.mobile/en_GB/?ObjectID=48300116 Looking at the job it should have been a five minute job to...
  14. Spot1

    EGR block off and ECU remap Chip landrover

    Well, yeah, it can be done that way, just put it in the joint at the exhaust manifold then that blocks any exhaust gas from entering the EGR. It basically takes the place of my 2p.
  15. Spot1

    EGR block off and ECU remap Chip landrover

    Goes on the exhaust manifold when you remove the EGR pipe & cooler
  16. Spot1

    EGR block off and ECU remap Chip landrover

    Why thank you! Where there’s a will and all that...
  17. Spot1

    Spots Disco 2 ES Premium project.

    Another day hard at work on/under the truck, I've finally got around to replacing the power steering pump! :D:D It wasn't as bad as I expected, probably took an hour & half to two hours ish. Hopefully that is the end of my steering problems! I think almost all the pipes have been replaced, the...
  18. Spot1

    Spots Disco 2 ES Premium project.

    Basically the same, It looks like an ES Premium going by the wheels, the same as mine. I was tempted by the same roof rack but wanted one that is totally flat to keep the option of a roof tent open in the future.
  19. Spot1

    EGR block off and ECU remap Chip landrover

    Here you go; https://www.landyzone.co.uk/land-rover/spots-disco-2-es-premium-project.330929/page-6#post-4795142 You'll understand my 2p comment when you see it. It’s about 5-6 posts from the end. I've just had a look, you're after post #88 on my thread.
  20. Spot1

    EGR block off and ECU remap Chip landrover

    Have a look at the tail end of my thread I’m running in my ES Premium to see how I’ve dealt with my EGR. It cost me 2 pence! with regards to remaps, mine was already done when I got it but there were some slight issues with it. I got it remapped again by José from TD5 Inside and it has made a...