Good Evening. I meant a 2004 in my original post. So today I checked all the earth's I could see around the engine bay. Cleaned and refitted. I pulled all the fuses out and visually checked them and re fitted. I also took the starter relay out and checked I was getting 12v there to switch the...

Hi. Thankyou for your reply. It seems just the same as your issue as I also have no sound. I read on a post that mark c commented on about checking starter relays and powering different parts. I can get the engine to spin over by bypassing the starter relay but still not firing. I'm going to...

Haha very good. I missed that

I'm pretty sure it's an l322

Hi guys I have a 2001 vogue petrol v8 l322. Some time ago I stopped the car after a short journey and left it for around 2 hours. On returning I had all ignition lights and functions but the engine wouldn't turn over. It's been sat for 18 months now ( I know that's not great) and have just...

Ahh ok I'll keep my fingers crossed and avoid low range for a bit thanks for your help

It's a diesel. U also think I may have fixed it. I put it into low today and it got stuck there. A lot of fiddling with the switch and disconnecting the battery a messing I got it To go back into high and the failsafe problem has disappeared. So can I assume it's the motor for the high low???!

Hi guys So I moved on from my beloved p38 to an 03 reg l322. Love the car hate the Niggly faults. When I'm driving it around 10 minutes into any journey I get the dreaded transmission failsafe message but it has no effect at all on gear selection or function. It can come on then off up to 8...

Yea thats a good suggestion as I've read things about the dash boards playing up but they still start. This won't do either. I just have a click in the becm and the relay board under the bonnet when the key is turned to start.

Hu guys I sent the becm off to rick the pick and he was very helpful and fast with the turn around. Unfortunately it hasn't sorted the problem I have. I put it back on with a new fuse board (under bonnet) and no change. Just the green screen in the middle. I've spent 3 hours checking wiring and...

Yea all fuses are ok. Ive sent the becm to rick the pick he seemed very helpful. Fingers crossed

Ah well that's happening

If it was out of sync would it stop all the ignition lights coming on like no bulb check

Ok I'll try and find him thanks

Hi guys it's me again! After all the help I had from some very experienced range rover guys last time I posted here I'm back. So I got the p38 bug and went and bought another 2.5 dse on an m plate. I bought this truck with the problem that hasn't yet been looked into (or so I'm told) by the...

I'll give her the love she deserves soon enough. Just a temporary modification let's say :-P

Haha thanks. Kind of impressed my self I must say.

Right guys I've fixed it tonight!!!!!!! Call me a bodger if you like but time and money are on my mind when it comes to replacing the flywheel. I removed the cps and measured the height of an intact lug using a vernier gauge. So knowing the size of the lug I set about welding a small tack...

Ok cheers

Hi where do you get the puns for the flywheel. I'm experiencing the same problem. Mine runs fine untill 2200 rpm then the injection light triggers and the engine misfires/lurches.