Thank you for that helpful advice. I origionally thought they were holes for rusted blind rivets and ignored them, but on closer look they were rusty screws after all. I manged to get the rusty screws out. I had hoped I could open up the reflector and clean the inside of the glass/plastic (as...

I have a pair of 6.5" Land Rover badged driving lights on my Land Rover bull bar. The lights are made by zkw (I think) model e12 (1995). I cannot figure out how to open the plastic casing up? No screws, (not even a screw behind the Land Rover badge) Has anyone any ideas? I tried flexing the two...

Hello, I am in Australia. I have a 1995 TDI Disco Auto. It was made in 1995 (name plate) but the rego says it is a 1996. It has central locking, alarm and immoboliser (factory fitted). It has the 2 button remotes. One of the remotes does not work any more (intermittant). I have tried...

Hello, I just changed my transmission filter after 273,000km. The pan screws all came off easily except the rear one. I had to loosen off (and almost completely remove) the transmission mount to get to the bolt head. This added about 2 hours to the job (had to support the rear of the...

Hello, I have 1995 TDI auto Disco. There is some sort of filter canister under the rear arch near the fuel tank and a filter canister under the bonnet. The one under the bonnet has a hand screw under it to flush out water etc. I opened this into a slean jar but only clean fuel came out...

Hello, Does anyone know, whether the paper gaskets are the same for the front drive flange and the rear flange cover for my 1995 TDi Disco auto ? I am planning to re-pack the wheel bearings (no problems with them but probably due at 273,000k). Also what is the very best grease ? Is it some...

Hello, Internal stickers are a great idea for longevity, but as they have to go on the glass, the size might be an issue, as they could obstruct sighting. I cannot think of a safe suitable spot on my Disco windows for such a large sticker as the rules here are quite strict particularly...

I realise I'm in the wrong forum, but thanks for that. I was worried that I should be repacking the bearings regularly to reduce wear or pre-mature failure (just as I should on my trailer bearings). On the front, there is a small amount of spline wear between the axle and drive flange, about...

Thanks everyone.

Hello, :) I have a 1995 Disco TDI Auto. I live in Sydney Australia. The vehicle is going well, and I plan to keep it for quite a few years more. Lots of minor hose and gasket weeps but no serious issues, but I am way overdue for some major servicing (I've been slack the past 150Mm) so the very...

:) I have a 1995 TDI Auto Disco, 274k. Its in great condition. I have checked for any detectable movement in hubs (none other than some backlash in the overall drive train). Can I get away with only repacking the bearings, or is it manditory to replace the bearings every so often?