Can get one....

HELP!!!! BUT PLEASE KEEP IT VERY SIMPLE!!! Trying to fit driving lights (not LR) to 2001 Freelander V6 so they come on/off with high beam….Mounting onto roofrack. Wiring kit instructions say to connect into main beam circuit…. Got all the bits to do it but which wire and where is best place...

As much as it hurts me to say...gotta agree with MHM for once....Now taking myself of for severe beating and self mutilation. Back when Im better for more disagreements.:frusty:

Just make sure you get her to hold your tool while your there....Good luck

Its there somewhere.... Will try and get pics off my phone for the doobreydog definitive cure to all cracked chassis mounts.

Whatever happened to a bit of string and basic maths???

Forgot to add...illegally modified 4x4..... cause trays on side were stuck on with wrong size bolts:D

And it will be all your fault cause your the one driving a 4x4/landrover/gas guzzler Can see the headlines now :doh: 4x4 CAUSES M'WAY PILE UP CAUSES 97 UEAR OLD PENSIONER IN FRONT TO HAVE HEART ATTACK

Getting to her bush could be a bit fiddly...best done in dark so you can feel your way round but get it wrong and could end up in sh1t..:rolleyes: On serious note Easiest way Ive found is to drop rear subframe ...not as drastic as it sounds .... Jack motor and support under the standard...

Well after (how longs this thread been going) Could not find anyone including optima themselves who would reccommend any of their yellow top range for V6 (all either not powerfull enough or too big to fit in hole without serious mods....Cheers for pics helped a lot Have decided to go for and...

Ding Dong.....

If "clunk" is only apparent when accelerating it will probably be the front mount on rear diff. This will normally happen in all gears though (does get worse with time) Normal cause of noise from rear end 1st - 2nd only is rear chassis mounting .... will normally be more noticable when turning...

Piccy would be good as not a lot of room for manouver in mine...V6 with LPG....Battery I took out (dont think original) took 2 people to remove due to limited access and phat ffiingers. Can anyone tell me if this is original spec:::: Info on battery Rover part No AMR5469 Delphi Part No...

Very old post ressurected here....battery now finally and utterly shagged out, need to get another VERY SOON.....probably the optima yellow who knows whos doing any deals or decent prices....Been Googlng for last few hours and still not getting nowhere fast.

Result....Saved on nails as well;-)

Sorted....could well have been a bit squiff.....took it off again, piston in an out a few times.....seems fine now Cheers

Think my fookin dog could have worked that out:doh: but will forgive you as you managed to refrain from your normal burn it comments. As for topping SWMBO I could have stayed warm and dry and got Kwik Fit to do the job. Just wondering if these are prone to ridges, burrs or crap build up (It...

Just done a change of brake discs and pads...Rushed a bit in dark as mrs was waiting for motor 1st side no probs other side caliper dont want to go in but with bit of force managed to get back. Seems to be sticking in one place only about 1/4 inch from fully back. Fits brakes and gets it...

All on rave, think I posted them on here recently as well.

****ry shillings????:doh: