Hi All, Anyone know where I could get the clips/ screw caps for the grey part of a 200 dash please?

Looked under the seats and it appears the wiring is in place. Just wondering where the heated seat buttons would be placed, so The one I'm getting is constant 4x4 I belive

Hi All, I have just agreed to buy a 2010 Freelander 2 GS from my parents at trade in money, so think I ve got a good deal as its only done 43k. Really nice vehicle apart from the cloth interior letting it down. Has anyone retro fitted aleather one, or is there a guide on this site of what to...

Thanks all, I have connected nearly everything. Maybe it is spare as I did label everything else.

hi all just reconnecting all my wiring on my 200tdi as part of my rebuild. I labelled all the wires, well thought I had!!!! Got this one Two green and black one black. Coming off the main loom any idea what it connect too please?

I have been rebuilding my new marsland chassis 200tdi and just doing the brake pipes. The holes are there but they are to large for the clips I have bought. As it's a newer chassis would later Tdci clips be any different and fit?

Its been a while since I stripped my old 92 200tdi as I am replacing with a new chassis. Now just refitting bits and got to the power steering. I thought I took enough photos to help with the refit but obviously not!!! Has anyone out there got any good photos showing the position of the...

Mine are drums on the rear and discs in front.

i have just seen these for sale and would like to put them on my 1992 defender. Just wondering if they would fit. They guy says they were off a 1989 discovery? I think my front axle is a bit later through as it has got the wider brackets for the radius arms. Not sure if it makes any difference...

Thanks the angle of the spring seats and diff housing pointing up just looked strange.

Thanks James. Still learning as I go with this project, so anyone's advise helps loads. Is it best just to put the springs on and when the engine is fitted they will level themselves out?

Hi All I have been busy fitting up my new Marsland galvy 200tdi chassis for my 1992 defender. I have fitted up the front axle but it looks at a weird angle when the radius arms are in place. It looks as if it's pointing up to much meaning that the spring seats are not level. I have attached...

Thanks JamesMartin and Kwakerman. The bolts were only just put there to hold the arm in place to see what the fitment was like. I have got the longer bolts in another box somewhere!! Thanks again!

Hi All, I was in the process of refitting my front radius arms on my 1992 200tdi defender, but the arms seem really loose when going back. They are the same that got taken off just painted up and rebushed. I can't remember them being loose when they came off or if it was packed out with thick...

Looks really good. How much was the retrim kit please? Also what colour code for your truck please? I really like the green.

Thanks for all the replays I am going to wire brush/needle gun everything and then treat the metal with the fretan stuff mentioned above. Once done do you reckon 2 or 3 coats of the rust-oleum paint would be good enough, or should it just be used as a primer then another top coat if I was going...

Will have a look at that. Will the primer go on to rust and on anything that still has paint on it?

I have just finished the strip down of my defender, and now ready to start the clean up and painting the axles etc. I used hamerite on a mk1 escort rebuild a few years back, but that started showing rust pretty quickly after. I have read a few articles saying Por15 and rust-Oleum are pretty...

Cheers Flossie

hi Flossie, that would be great. Thanks for the heads up on YRM Er1c