Its in bits now, separated from the chassis. Open to offers on all parts.

Good question. I’ve been trying to sell it but no one wants to pay a reasonable price. I think eBay makes people think they can get a good 4x4 for £1k. In reality, they get a money pit. Trying to sell this has been hard work and it’s a shame to break, but it is what it is. By the way, I didn’t...

There should be a circlip holding the bearing in. Did you see one when you changed the bearing?

I’ve been sending a lot of things back recently. I’m getting tired of companies advertising one thing and sending something else.

No longer available. Breaking a D2 TD5 (2000) Auto. ACE Photos on request. Most parts currently available. Complete engine (10p) rebuilt about 300 miles ago with rebuilt turbo, new water pump, head and block faced flat. New gaskets & seals throughout. Starts & runs well. £1000 delivered...

As predicted, here's they reply from the company... "The wiper blades supplied is actually a better quality item from Allmakes as the Bearmach wipers are temporarily out of stock with the supplier." If they're out of stock, why still advertise it? If you want to send an alternative product...

Yes, I understand that Bearmach puts their name on stuff. I think they have stuff manufactured for them don’t they? Which enables some quality control, as Bongo says. This blade cost me £6.30 delivered, which isn’t much but do I complain on principle of being sent something other than what I...

I’d say yes. I’ve spent ages trying to start, running purge after purge thinking that there was still air in there but when I hit the sweet spot on the timing, it fires up immediately. I realised then that one purge should probably do the job - unless you have other problems, and it’s just then...

I bet the family are well chuffed with the move! I myself live in a shack beside a field. When I brought my wife here, (she is a city girl), it took her three years to get over it. Actually, I think she still resents me sometimes.

To purge the fuel lines you turn ignition on, don’t try to start. Then pump the throttle 5 times quickly until CEL starts flashing. Then go and make a cup of tea. It will take a few minutes to complete the process. However, I found that having the timing set correctly (for my engine it’s...

I have a 10p ECU if you want to try it.

I would loosen the bolts on the cam pulley and retard the crank a tiny bit. It can be really hard to start if it’s not in the sweet spot. A mm here or there can make a lot of difference. Did you run the purge process?

Isn’t that what he was doing? The factory settings let it sit in the middle when the real temp is between 65 and 115. The standard temp gauge is a waste of time since the moment it starts to move upwards from centre you’ll see steam coming out of the bonnet at the same time.

I’m getting tired of ordering a specific brand of part and being supplied with something else. I have ordered a Bearmach rear blade from OffRoadRovers on eBay and have been supplied with a Blades Direct item. What are your views on whether it’s a reasonable replacement or did standard to...

It does sound ike a transmission problem, espescially since you were towing at the time. Hold the clutch in and try it again. If it starts with the clutch in then releasing the clutch is probably going to make an awful noise and is maybe a broken layshaft in the main box. Having said that, if...

I rebuilt the steering pump on my D2. The old one was leaking a bit so I have replaced the bearing, oil seals, O rings and gasket. Not exactly cheap for all the bits but better than paying for a new Chinese one.

I wouldn't worry about your bolts/holes, I would expect they will be fine but I use an assembly paste under the bolthead when I install head bolts. Click here, ARP. It stops that pinging and lets you torque up nice and smooth. I noticed on Elring (I think) gaskets now that the torque sequence...

When you say a full rebuild do you mean of the whole car or just the engine? Gearboxes too or not?

So, how do you know where green lanes are? Are there maps to show them or do you just search for byways and just drive it?

On the bottom? Nothing. Differences are in the head. Fuel return from above the alternator back behind the air intake. Timing chain tensioner. Green injectors on late engine. Cam part number - not sure exactly what the differences are between them though. Valve cover gasket.