duker996
Active Member
thought it was mine!
New Member
kurust is a great prod used it on an old cavilier i had.Clean of lose stuff and coat up it dries like varnish turning rust black.
ye red oxide is now dead and gone due to law. the wurth stuff comes in 1litre tins and brushs on ,or sprays on , its top stuff, i coated my rear arms months ago in it , and guess what no rust.
mmm its around 25 quid a tin but it goes along way, and its well worth it , get it worth it
thought it was mine!
New Member
mate sorry to correct you red lead is dead red oxide you can still buy gliddens and petrmoglaze both still sell red oxide and blackfriars and international do the smaller size tins.ye red oxide is now dead and gone due to law. the wurth stuff comes in 1litre tins and brushs on ,or sprays on , its top stuff, i coated my rear arms months ago in it , and guess what no rust.
thought it was mine!
New Member
buy an amp and bigger speakers:doh:Won't it be loud as fook then tho
thought it was mine!
New Member
sorry sounds like spam! got sharesyep , iam a donkeys dick
waldershelf
Well-Known Member
I've used Bonda primer on mine, sounds pretty similar to the Wurth stuff?
hammer and chisel, wire brush, flap wheel, whatever you can to get as much rust off as possible. Coat it with a high Zinc content primer (Wurth/Bonda/???) and your choice of Schutz I use the "underbody shield with waxoyl". It works for me and I've been messing around with old bangers for a very long time.
Modern anti rust primers based on Zinc are just about getting back to the efficacy that lead based primers were before they were banned.
hammer and chisel, wire brush, flap wheel, whatever you can to get as much rust off as possible. Coat it with a high Zinc content primer (Wurth/Bonda/???) and your choice of Schutz I use the "underbody shield with waxoyl". It works for me and I've been messing around with old bangers for a very long time.
Modern anti rust primers based on Zinc are just about getting back to the efficacy that lead based primers were before they were banned.
coat all your metalwork inside and outside in wurth ruststop. inside you can even schutz that if its not seen .
GreenHornet
Well-Known Member
That's not too bad at all.
All panels are readily available and the odd small hole is easily plated. A couple of weekends and you'll be done.
All panels are readily available and the odd small hole is easily plated. A couple of weekends and you'll be done.
