The rear quarters of our L322 were 'scabby' when we first got it, but I didn't pay much attention because there were far more serious issues to deal with, namely the rusted out sills and rear jacking points. Anywat having dealt with all that lot and just having MOT'd the Old girl I decided it was time to sort out the rear quarters. Unfortunately I cannot use paint and primer etc because the appalling state of my lungs, so I decide to try and do a wrap. Hmm how hard could it be I wondered, well the answer is very hard indeed, especially if you are stupid enough to attempt it on your own! However I have to say if you are patient AND you have an assistant it can be done. You need a good heat gun, ISO propyl alcohol and a scalpel, but more importantly you need to THOROUGHLY prep the area you are going to wrap because any imperfections are magnified by the wrapping process.
I have awarded myself a 5 out of ten score, as it is the 1st time I have ever attempted such a task. But at only £15 a quarter it makes very good financial sense. I will probably redo the 1st attempt after completing the 2nd one with the knowledge `i have gained, but still £45 is a small price to pay for what would have cost an awful lot more in primer, filler, paint and clear coat. I will upload some pics when I have finished both sides, I would definitely recommend the process unless you are going for a concours finish.

Because of the lack of a picture we all have to say it really looks terrible from here.

DanClarke said:

Because of the lack of a picture we all have to say it really looks terrible from here.

Click to expand...

Until proof appears , agreement is unanimous

Here is a picture, this is the worst looking one because I don't want to be in denial! As previously mentioned i wlll redo it later after using some knifing putty so the surface is really smooth and the blemishes not highlighted. It still looks a lot better than what was there before and colour matches the air intakes at the front.

nevillen said:

I cannot use paint and primer etc because the appalling state of my lungs,

Click to expand...

nevillen said:

You need a good heat gun, ISO propyl alcohol

Click to expand...

Sorry it looks like a cover up.
And if its not fixed properly will be worse after the winter and it will come back to bite your bottom

Just being honest sorry.

J

looks ugly but it was properly treated with rust eat before the wrap

Will reflect what's under it so no different to paint in that respect.
To avoid the little bits of dust that I think have caused the small nibs you can see higher up give the panel a quick light wipe with a tak-rag to remove them.