He is a spamming barsteward its obvious, my bet is he doesnt come back to defend himself in anyway, he will just open another account in a different name and continue to spam until he is busted again.

BEWARE CLEMS123 IS A SPAMMER WORKING FOR FREELANDERSPARES
 
Hi,

Just read all of CLEMS123's posts and I have to agree that he's highly suspicious.

I'll be keeping a close eye on this thread as I'm going to be replacing my VCU and perhaps some other trans bits quite soon.

I know where I wont be ordering them from.

Good luck guys with the refunds etc.

Singvogel.
 
I had mine refurbed via a local garage at an eyewatering amount of money, or so I thought til I read what others are paying.
They also sent the VCU away to be flushed, cleaned and refilled with new and improved viscous fluid.
That was a year ago.

It's all been checked by me using all the available methods on this and other forums and is functioning spot on.

All I have to do now is make sure my tyres don't spoil everything again.
 
Singvogel said:
Hi,

Just read all of CLEMS123's posts and I have to agree that he's highly suspicious.

I'll be keeping a close eye on this thread as I'm going to be replacing my VCU and perhaps some other trans bits quite soon.

I know where I wont be ordering them from.

Good luck guys with the refunds etc.

Singvogel.
Click to expand...
Hello Singvogel
If you buy from Bell's make sure he's aware that you have the later VCU fitted as the drive shaft on the later VCU (or the flange) is shorter than the earlier version. I had to shorten the drive shaft (grinding) which allowed the two flanges to tighten up correctly. Bell's are aware of this problem and advised me to shorten the shaft, give me a shout if you would like more info.
 
nickcc said:
Hello Singvogel
If you buy from Bell's make sure he's aware that you have the later VCU fitted as the drive shaft on the later VCU (or the flange) is shorter than the earlier version. I had to shorten the drive shaft (grinding) which allowed the two flanges to tighten up correctly. Bell's are aware of this problem and advised me to shorten the shaft, give me a shout if you would like more info.
Click to expand...

Thanks for that Nick - I'll get back to you if I need help.

Singvogel. :cool:
 
well i have my replacement vcu from freelander spears uk .
And i will have it fitted at the weekend so i we will see if it works and ill keep you posted.
the way thay have been so far it good but we will see if the new one works.And if it does credit to them but thay must no by the fact that 4 people on here alone have had the same thing around the same time theres a problem. we will see
 
dave21478 said:
And to update my experience, I have had a reply from FreelanderSpares and it would seem that the situation will be resolved to my satisfaction.

Things go wrong, products fail, things get missed - sh*t happens basically. Its rarely the sellers fault and I have always believed that it is how a company handles a problem after it has been identified that counts for a lot more than the initial problem.
Their proposed resolution keeps me happy and redeems the original screw-up.
Click to expand...
yes but will thay admit that there was a fault with them we will see
 
my second one of freelander spare seems OK I am pleased to say they sent me a new one very quickly as I am disabled and need 4 wheel drive in this bad wether so i do not get stuck I explained this to them and next day it was here good on them and remember they do not renew them they only sell them so we must blame the refurbishers
 
You must log in or register to reply here.

Similar threads

F
£300 Freelander project! ... my first ever Land Rover
2 3
Replies
44
Views
4K
pwood999
pwood999
stumpyj
(2000 TD5 90 defender)TD5 Fuel Pump
Replies
4
Views
265
stumpyj
stumpyj
P
Fault finding Autobox Freelander 1 (V6)
2
Replies
20
Views
3K
felborba
felborba
rich28uk
L322 Wheel bearing or something else
Replies
13
Views
2K
rich28uk
rich28uk
Lackingsense
Sport Air suspension/HDC fault
Replies
14
Views
2K
Lackingsense
Lackingsense