saxmanuk

Active Member
So, I dont have a garage that the defender fits into! so my bloody hands are freezing after 5 mins of tinkering in this weather! If I put big gloves on then I cant hold screws or anything small and if I wear blue latex jobs they are just as cold!
Anybody spanners out there that can advise on a good warm thin glove?:cool:
 
fan heater!!
seriously, if needs be, I trap a tarp around where I working, fan heater in there, blowing over me tools, works a treat.
tbh tinkering jobs get left in this weather, essential work only for me!!
 
I use some called 'skins' or simelar. Goto your local builders merchants and they'll have them.
 
Thermal fingerless gloves are ok.
Like Tim I never do major refurb, jobs at this time of year, its no fun and paint doesnt dry! I wil do minor essential repairs if I have to. Nice to make a screen or roof with a tarp. or why. if you can.
 
Mechanix gloves.

Ive got two sets, one full length fingers one with the tips cut off.

Flexible and easy to hold nuts, bolts, screws anything really. Cheap too £20.00
 
As has been said it isnt really cold over there so stop being a puff, but last year when i had to swap out the front diff (which involves taking the hubs off, removing calipers, stripping bearings etc etc etc and pulling the shafts) and do some welding on the disco i used the two glove method as it was down to -25 in the garage where i was working and the fan heater trick just wasnt cutting it. A pair or latex then a pair of contact type gloves over the top, the layers work well at keeping some heat in and you can still feel things and hold fiddly bits.

but what i found more useful than anything was just making sure the rest of me was toasty warm so a hat and all the trimmings can make all the difference to your hands ;)
 
I've just bought some lined workgloves from local builders been out most of today stripping bits off the disco and fettling the 110. and me hands were lovely and warm.. :D Mind yu I has fleece baselayer under jeans, sweatshirt and a hi-viz bomber jacket thingy Oh and a wooly hat..

These are the gloves I got http://www.arco.co.uk/products/14G4800

Bastids at the builders merchants charged me £13 for em :eek: Robbing bastids..
 
Last edited:
Thanks guys for the pointers........:)
Got some new exmoor 2nd row seats (highback) as want the kids to be safe in the back whilst having fun in the snow....so involves removing the brackets etc from the back. also some wiring as dodgy earth and connectors to the side lamps...
Like the Seal Skins alot....then again I might just kick the wife outside and I will do the cooking in the warm kitchen!:D
 
So, I dont have a garage that the defender fits into! so my bloody hands are freezing after 5 mins of tinkering in this weather! If I put big gloves on then I cant hold screws or anything small and if I wear blue latex jobs they are just as cold!
Anybody spanners out there that can advise on a good warm thin glove?:cool:

I wear these buddy ... fantastic for the price and if they get covered in Waxoyl, paint, grease or EP90 just throw them away and get another pair out.

I usually buy two packs at a time ... handy to keep a couple of pairs in the Landy too ;)
12 PAIRS BLACK WORK GLOVES NEW PU COATED BUILDERS MECHANIC CONSTRUCTION GRIP | eBay
 
bit ott... but i have a heated waistcoat by keis... as has been mentioned if your core is warm the rest of you is as well!

Ok its over a hundred notes with the battery pack... but it has loads of other uses!!!!
 
Mechanix gloves, i wear them everyday. I've even been able to fit bulbs and undo the small nut holding the wire on an alternator. I also fit tyres wearing them and they are holding up well.
 
Skytec ones are the best, you can get them for about a fiver and they claim they go to -50, still easy enough to work in too
 

Similar threads