KarelP38

Active Member

• Sep 9, 2012

• #1

Please help.

I have a 3.5 twin carb. Behind the oil filter is two wires. There are they suppose to go? Mine is still connected at the oil filter, but at the firewall they were burnt off, so don't know where they're suppose to go to.

 

Last edited: Sep 9, 2012

stutab

Well-Known Member

• Sep 9, 2012

• #2

Hi, I will have a look at mine and get back to you!! Its at my work as is off the road. What model and age is it?

Stu

 

KarelP38

Active Member

• Sep 9, 2012

• #3

Hi Stutab


I think mine is a 83, but not sure. Age - It is nearly as old as me ! !

Behind my oil filter is two things with wires. My oil preassure dial still works, but my oil temp is dead.

 

stutab

Well-Known Member

• Sep 9, 2012

• #4

I got my 84 because it was as old as me!!! I will look and take pictures for you if it is any help!!

 

KarelP38

Active Member

• Sep 9, 2012

• #5

PROBLEMS . . . When I switch my headlights on, my starter motor runs ! ! !

Seems like I got a lot of work waiting for me.

 

stutab

Well-Known Member

• Sep 9, 2012

• #6

Hi I have had a look at my Rangy, the wiring on mine looks original and there looks to be one wire coming out of the loom and going into the filter housing, dunno what it does but hear is a pic.

By the sounds of things you need a new loom and start again!!:violent:

 

KarelP38

Active Member

• Sep 10, 2012

• #7

Hi Stu

Thanks.

Mine looks different

I'll have to get a pic on here, to be able to explain myself better.

 

KarelP38

Active Member

• Sep 10, 2012

• #8

I got one pic for now.

It is the top of the engine.

The one circle is the one sensor . The other circle is my thermostat housing.

What are the two sensors for? Where are they suppose to go?

Hope someone can help me. The wiring on my car is a bloody nightmare.