So the plot thickens, I have looked at my 2005-2012 RRS DTCs.
I cant find a U0102 .

But all I can say is, if the car drove then broke down and was taken to a garage where some work was done I would investigate electrical connections as a first port of call.

And of course we all wait for Phil to come back with the answer :).

J
 

Attachments

  • RRS 2005-2012 transferbox DTC.pdf
    317.1 KB · Views: 124
  • RRS 2005-2012 gearbox DTC.pdf
    526.7 KB · Views: 131
Definitely thickens lol

It’s such a strange fault especially the fact it shows it’s going into RND etc and the cable moves and you can hear it move in the gearbox yet the car doesn’t
 
dave7494 said:
Definitely thickens lol

It’s such a strange fault especially the fact it shows it’s going into RND etc and the cable moves and you can hear it move in the gearbox yet the car doesn’t
Click to expand...
Who/what gave you the codes?
As I said it may shift but as it doesn't know all is well it says "nope"

If you put the gearbox in neutral with the handbrake off can you move it?

J
 
marjon said:
Who/what gave you the codes?
As I said it may shift but as it doesn't know all is well it says "nope"

If you put the gearbox in neutral with the handbrake off can you move it?

J
Click to expand...
I have an Autel mk808 and an icarsoft diag

Yeah gearbox in neutral and handbrake off I can push the car and it moves with no issues
 
Mark Piercy said:
Is there any oil in the gearbox?
Click to expand...
Hi mark , there is , but I’m now thinking maybe too much. I had the car raised at the side so the fill plug was higher and when I started to undo the plug it started ****ing out. Would too much oil in gearbox cause the lack of movement when I gear?
 
dave7494 said:
Hi mark , there is , but I’m now thinking maybe too much. I had the car raised at the side so the fill plug was higher and when I started to undo the plug it started ****ing out. Would too much oil in gearbox cause the lack of movement when I gear?
Click to expand...
There is a correct filling procedure which includes final filling at the right temperature. With the engine not running, oil will pour out. I doubt it's overfilled and I doubt that even if it is it would stop the car moving, might cause problems in use though.
Gear selection is done electronically, so corroded connectors are a possibility.
 
Datatek said:
There is a correct filling procedure which includes final filling at the right temperature. With the engine not running, oil will pour out. I doubt it's overfilled and I doubt that even if it is it would stop the car moving, might cause problems in use though.
Gear selection is done electronically, so corroded connectors are a possibility.
Click to expand...
I will check connectors again just incase. Would it just be the multiplug that goes into the gearbox?
 
Undone the fill plug for gearbox oil when car was flat and it was a small trickle , from what I can see that’s correct ?
 
dave7494 said:
I will check connectors again just incase. Would it just be the multiplug that goes into the gearbox?
Click to expand...
That one, but because of the CAN BUS system, there could be faults in other connectors or modules that would stop the gearbox from working. Not really an area I know a lot about.
 
marjon said:
There maybe(probably) 1 to the transfer box too.
As the fault seems to show coms between the 2.

J
Click to expand...
I think there is 2 to the rear of the gearbox. I’ll be back at it tomorrow. I’ve noticed there is a comms fault with the parking assist module so I will locate that tomorrow and see just incase that’s throwing everything off
 
dave7494 said:
I think there is 2 to the rear of the gearbox. I’ll be back at it tomorrow. I’ve noticed there is a comms fault with the parking assist module so I will locate that tomorrow and see just incase that’s throwing everything off
Click to expand...
Thars a good call as a lot of systems are linked and a code from one module can come from somewhere else sometimes 🤔
 
Mark Piercy said:
Thars a good call as a lot of systems are linked and a code from one module can come from somewhere else sometimes 🤔
Click to expand...
I’m hoping and praying it’s something silly. Would I be correct in saying the parking assist module is in the boot behind side carpet?
 
You must log in or register to reply here.

Similar threads

Joe varley
The dreaded 2.7 sport lol HELP
Replies
7
Views
571
Joe varley
Joe varley
pete980
2.7 TDV6 2006
2
Replies
38
Views
5K
gstuart
gstuart
R
Sport L320 fault code p2288
Replies
3
Views
1K
Datatek
Datatek
O
Series 2 won’t start! Please help xx
2
Replies
32
Views
2K
pabloako
pabloako
J
P38A p38 EAS - immediate drop of pressure
Replies
11
Views
620
Mark Piercy
Mark Piercy