S

stefan063

New Member
Were are all the wiring for L322 for air suspension?

Engine was washed and now there are air susp inactive,dsc and hdc lights on?

What could be the problem prior to washing the engine?
 
Last edited:
Rangies don't like being pressure washed, water has got in somewhere that it shouldn't have. Could be serious.
 
Check all the electrical connectors for water ingress, if you have access to a compressor blow them dry or a possibly use a water dispersant spray.

If you find water in a connector mounted on an ecm I'd leave it to dry naturally as spraying any chemicals into an ecm could cause you more problems.
 
Last edited:
zzr1200 said:
Check all the electrical connectors for water ingress, if you have access to a compressor blow them dry or a possibly use a water dispersant spray.

If you find water in a connector mounted on an ecm I'd leave it to dry naturally as spraying any chemicals into an ecm could cause you more problems.
Click to expand...

I did not find any wather in connection jacks. All dry. Where is ecm fitted? What jack are for air susp?

Thank for fast responce...
 
stefan063 said:
:( Not me... Stupid wash service. Although I will take their money for the problem,but I want to sort my self because it is my friend wash service...
Click to expand...
yep, but that might mean a drawn out claim against em.:doh:
 
Want to tell ya that this morning when I started my RR every fault was gone...AIR SUSP,HDC and DSC were working until later I started again and after one bump every thing lit again... So please can anyone tell me what to look and what to do???
 
Check the abs module for water ingress and get the ecu fault read it could be a alternator fault due to being washed
 
Best to just take it to your local Land rover specialist and get it hooked up to a computer. Will cost about £50 and they will be able to reset it for you and tell you if anything is nackered. Well thats the theory anyway :)
 
Land Ho! said:
Best to just take it to your local Land rover specialist and get it hooked up to a computer. Will cost about £50 and they will be able to reset it for you and tell you if anything is nackered. Well thats the theory anyway :)
Click to expand...

Hi guys...

I just came back from Belgrade about 150km from my place (where is Land Rover service and dealer,but I didn't drove RR to service)...

When I got up this morning and went to the car,there was some whining noise in cabin and also in engine bay. I didn't know from where it was coming until I listened to big black box... Noise was coming from it. I punched It once and noise was gone. Got inside RR,started it and there were no errors... I passed about 500km today,started car about 5-6x and by the time I was home no error was there... Could It be possible that when I punched it,it somehow get OK!? What is in that black box? What could I fix by punching the box?

Gremlins,bad contact (no water was in that box) and also checked ABS, no water there...

??????!!!!!!! :D
 
You must log in or register to reply here.

Similar threads

I
0x0032 CAN bus Fault
2
Replies
22
Views
2K
invisible999
I
L
Range rover vogue 2004 4.4 air suspension and hdc inactive
Replies
2
Views
435
Datatek
Datatek
O
03 L322 EAS ECU Can bus fault / ABS temp system deactivation
Replies
1
Views
488
oldradiotech
O
L
L322 Suspension inactive,hdc,DSC
Replies
7
Views
374
LR-hobbs
L
G
L322 No communication with air suspension with diagnostics
Replies
3
Views
2K
Mark Piercy
Mark Piercy