N norried Active Member May 25, 2018 #1 Ok after having my windscreen frame galvinized I need to refit the glass. Is the glass just sealed with sealant and then held in with the aluminium trim? I'm thinking Tiger seal. Thanks . Norrie.
Ok after having my windscreen frame galvinized I need to refit the glass. Is the glass just sealed with sealant and then held in with the aluminium trim? I'm thinking Tiger seal. Thanks . Norrie.
tottot Well-Known Member May 25, 2018 #2 Just make sure there are no lumps of galv where the screen sits and go for it.
FFG Active Member May 25, 2018 #3 I've used Sikaflex sealant extrensively on the caravan and cars to seal headlight covers for instance. Maybe this is a good option: https://www.uksealants.co.uk/sikaflex-521-uv.html, or this one: https://www.uksealants.co.uk/sikaflex-291i-marine-adhesive-sealant-300ml.html FFG
I've used Sikaflex sealant extrensively on the caravan and cars to seal headlight covers for instance. Maybe this is a good option: https://www.uksealants.co.uk/sikaflex-521-uv.html, or this one: https://www.uksealants.co.uk/sikaflex-291i-marine-adhesive-sealant-300ml.html FFG
Blackburn Well-Known Member May 25, 2018 #4 Usually a rubber strip its in the parts catalogue. You may need to get it back out at some time tiger seal very hard to remove.
Usually a rubber strip its in the parts catalogue. You may need to get it back out at some time tiger seal very hard to remove.
N norried Active Member May 25, 2018 #5 I thought it was just held in with sealant. There was no rubber seal when I removed the glass. Norrie.
I thought it was just held in with sealant. There was no rubber seal when I removed the glass. Norrie.